Bedienungsanleitung Karcher K 2 Full Control (Seite 10 von 112) (Alle Sprachen)

657291

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

– 6

ATTENTION

Risk of damage to the paintwork

When working with the washing brush, it must be free of

dirt or other particles.

Note: If required, the washing brushes can be used to

work with detergent.

 Illustration

Release the lever of the trigger gun and lock it.

 During longer breaks (more than 5 minutes), also

turn the appliance off using the "0/OFF" switch.

몇 CAUTION

Only separate the high-pressure hose from the trigger

gun or the device when there is no pressure in the sys-

tem.

 Release the lever of the trigger gun.

 Turn off the appliance "0/OFF".

 Disconnect the mains plug from the socket.

 Turn off tap.

 Press the lever on the trigger gun to release any

remaining pressure in the system.

 Lock the lever of the trigger gun.

 Detach the appliance from the water supply.

몇 CAUTION

Risk of personal injury or damage!

Mind the weight and storage of the appliance during

transport.

 Lift appliance by the carrying handle and carry it.

 Pull out the transport handle until it audibly snaps

into place.

Pull the appliance by its transport handle.

 Secure the appliance against shifting and tipping

over.

 Park the machine on an even surface.

 Stow away the accessories on the appliance ac-

cording to the device.

Prior to extended storage periods, as during the winter,

also observe the instructions in the Care section.

ATTENTION

Appliances and accessories that are not completely

drained can be destroyed by frost. Completely drain ap-

pliance and accessories and protect them against frost.

To avoid damage:

 Completely drain all water from the appliance:

Switch the appliance on with detached high pres-

sure hose and detached water supply (max. 1 min-

ute) and wait, until no more water exits at the high

pressure connection. Turn off the appliance.

 Store the appliance and the entire accessories in a

frost free room.

The appliance is maintenance free.

 DANGER

Risk of electric shock.

 Prior to all work on the appliance, switch off the ap-

pliance and pull the power plug.

Clean the sieve in the water connection regularly.

ATTENTION

The sieve must not be damaged.

 Remove coupling from the water connection.

Illustration

 Pull the sieve out (e.g. using flat pliers), clean un-

der running water and then reinsert it.

 DANGER

Risk of electric shock.

 Prior to all work on the appliance, switch off the ap-

pliance and pull the power plug.

 Push the lever of the trigger gun, the device will

switch on.

 Check whether the voltage indicated on the type

plate corresponds to the voltage of the mains sup-

ply.

 Check the mains connection cable for damages.

 Check setting at the spray lance.

 Completely open the water tap.

 Remove air from appliance before operation.

Switch on the appliance without connection the HP

hose (max. 2 minutes) and run it until the water dis-

charging from the HP outlet is free of bubbles.

Switch off appliance and reconnect HP hose.

 Pull out the sieve in the water connection using flat-

nose pliers and clean under running water.

 Clean high-pressure nozzle: Remove dirt and de-

bris from the nozzle bore, using a needle and rinse

through with water from the front.

 Check water flow quantity.

 Slight leakage from the appliance pump is normal.

If the leakage increases contact the authorized

customer service.

 Use Vario Power spray lance.

Turn the spray lance to "Mix" position.

 Remove filter from suction hose for detergent and

clean under running water.

 Check the detergent suction hose for kinks.

Operation with washing brush

Interrupting operation

Finish operation

Transport and storage

When transporting by hand

When transporting in vehicles

Storing the Appliance

Frost protection

Maintenance and care

Care

Clean the sieve in the water connection

Troubleshooting

Appliance is not running

Pressure does not build up in the appliance

Strong pressure fluctuations

Appliance is leaking

No detergent infeed

10 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 2 Full Control Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info