Bedienungsanleitung Karcher K 2.050 (Seite 12 von 24) (Englisch, Französisch, Spanisch)

657330

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

12 English

 All current-conducting parts in the work-

ing area must be protected against jet

water.

 The appliance may only be connected

to an electrical supply which has been

installed in accordance with IEC 60364.

 The appliance may only be connected

to alternating current. The voltage must

correspond with the type plate on the

appliance.

 For safety reasons, we recommend that

you operate the appliance only via an

earth-leakage circuit breaker (max.

30 mA).

 Cleaning operations which produce oily

waste water, e.g. engine washes, un-

derbody washes, may only be carried

out using washing stations equipped

with an oil separator.

 Only use equipment for less than 15

minutes continual.

CAUTION

Safety devices protect the user and must

not be modified or bypassed.

The appliance switch prevents unintention-

al operation of the appliance.

This lock locks the lever of the trigger gun

and prevents the inadvertent start of the ap-

pliance.

The overflow valve prevents the permissi-

ble working pressure from being exceeded.

If the lever on the trigger gun is released

the pressure switch turns off the pump, the

high pressure jet is stopped. If the lever is

pulled the pump is turned on again.

CAUTION

Create stability for the appliance prior to all

work on or with the appliance to prevent ac-

cidents or damage.

– The stability of the appliance is warranted

when it is placed onto an even surface.

The scope of delivery of your appliance is il-

lustrated on the packaging. Check the con-

tents of the appliance for completeness

when unpacking.

In the event of missing accessories or any

transport damage, please contact your dealer.

Illustrations on Page 2

1 High pressure connection

2 Appliance switch "0/OFF“/ „I/ON“

3 Storage for high pressure hose

4 Carrying handle

5 Storage for spray lance

6 Garden hose connector (female)

7 Water inlet connector

8 Water inlet (with water inlet filter)

9 Suction hose for detergent

10 Mains cable with mains plug

11 Trigger gun

12 Lock trigger gun

13 Clamp for high pressure hose

14 High pressure hose

15 Spray lance with Dirtblaster

16 Spray lance with high pressure nozzle

Special accessories expand the possibilities

of using your appliance. Please contact your

KÄRCHER dealer for further information.

Mount loose parts delivered with appliance

prior to start-up.

Illustrations on Page 2

Illustration

 Insert the transport handle.

Illustration

 Pull out the clamp for the high-pressure

hose from the trigger gun (e.g. with a

small screwdriver).

Illustration

 Connect high pressure hose to trigger gun.

 Push the clamp in until it locks. Check

the secure connection by pulling on the

high-pressure hose.

Safety Devices

Power switch

Lock trigger gun

Overflow valve with pressure switch

Prerequisites for the appliance's

stability

Operation

Scope of delivery

Description of the Appliance

Special accessories

Before Startup

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 2.050 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info