Bedienungsanleitung Karcher K 2.09 (Seite 19 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

471367

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

English

All current-carrying components within the working area must

be jet-proof.

- The appliance may only be connected to an electri-

cal connection that was performed by an electrician

according to IEC 60364.

- Only connect the appliance to alternating current.

The voltage must comply with the voltage specified

on the typeplate.

- Minimum fuse protection of the socket 10 A (delay-

action fuse).

- To avoid electric accidents, we recommend to use

sockets with a series connected residual current

operated device (rated breaking current max. 30 mA).

Warning:Warning:

Warning: Inappropriate extension lines may be dan-

gerous. If you work outside, only use extension lines

that are approved and specifically labelled and pro-

vide of a sufficient conductor cross section:

1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²

1 to 10 m: 1.5 mm² 10 to 30 m: 2.5 mm²

- The plug and the coupling of an extension line must

be waterproof.

- Always unwind the extension line completely from the

cable drum.

Connection to the Water Conduit

Please observe the provisions of the local water supply

company.

Only use supply hoses (not included in the delivery) with

the following dimensions:

- minimum length 7.5 m

- minimum diameter ½‘‘

Please see the typeplate or the section ”Specificati-

ons” for the connection values.

Operation

Danger of life!

Vehicle tyres/tyre valves may be damaged and burst

by the high-pressure jet. A first sign is the discoloration

of the tyre. Damaged vehicle tyres/tyre valves are

hazardous. Always perform the cleaning with a distance

of at least 30 cm. Never touch the mains plug with wet

hands. Check the power cord and the mains plug for

damages prior to each use of the appliance. If the power

cord is damaged, please arrange immediately for the

exchange by an authorized customer service or a skilled

electrician.

Check the high-pressure hose for damages prior to

each use of the appliance. If the high-pressure hose is

damaged, replace it immediately.

Danger of injury! Danger of injury!

Danger of injury!

Due to the water jet emerging from the high-pressure

nozzle, a recoil force acts on the trigger gun. Always

ensure a stable standing position and hold the trigger

gun and the spray jet firmly.

If necessary, wear protective clothes for the protection

from return spray.

Water Supply from the Water Main

• Connect a supply hose (not included in the delivery)

to the water connection of the appliance and to the

water supply.

• Open the water supply.

Water Supply from an Open Container

• Unscrew the coupling unit for the water intake.

• Fasten the suction hose with the filter (not included

in the delivery, see ”Special Accessories”) with screws

on the water connection of the appliance.

• Insert the filter into the container.

• Deaerate the appliance before using it.

• Unscrew the high-pressure line at the high-pressure

connector of the appliance.

• Turn on the appliance and let it run until bubble-free

water emerges at the high-pressure connector.

• Turn off the appliance, and fasten the high-pressure

hose with screws.

Preparing the Appliance

• Insert the mains plug.

• Set the main switch to ”I”.

Turning On the Appliance

• Press the safety button on the trigger gun, and pull

the lever.

Turning Off the Appliance

• Release the lever.

Press the safety button to prevent the appliance from

being inadvertently turned on during breaks or if you

leave the appliance.

Adding the cleaning agent

• Remove spray lance

No detergent in high-pressure mode

• Draw the cleaning agent suction hose out of the

housing to the required length.

• Hang the cleaning agent suction hose in the cle-

aning agent container.

If detergent has been added:

• Put the detergent suction hose into a container with

clear water, turn on the appliance for approximately

1 minute, and perform a clear rinsing.

Recommended Cleaning Method

1.Spray a small dose of the detergent on the dry sur-

face, and allow it to react (make sure the detergent

does not dry up).

2.Wash off the loosened dirt using the high-pressure

jet.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 2.09 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info