Bedienungsanleitung Karcher K 3.98M (Seite 11 von 168) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478380

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

English 11

When unpacking the product, make sure that no

accessories are missing and that none of the

package contents have been damaged. If you

detect any transport damages please contact

your dealer.

1 ON/OFF switch for appliance

2 Power cable with plug

3 High pressure connection

4 High pressure hose

5 Trigger gun

6 Lock trigger gun

7 Connection for water supply with filter

8 Coupling element for water connection

9 Suction hose for detergent

10 Storage for trigger gun

11 Storage for high-pressure hose

12 Storage for spray lance

13 Transport handle

14 Spray lance with pressure regulation (Vario

Power)

15 Spray lance with dirt blaster

Special accessories expand the possibilities of

using your appliance. Please contact your Kärch-

er dealer for further information.

Illustrations on Page 2

Illustration

Mount loose parts delivered with appliance prior

to start-up.

Illustration

Î Pull out the clamp for the high-pressure hose

from the trigger gun (e.g. a small screwdriv-

er).

Î Connect high pressure hose to trigger gun.

Î Push the clamp in until it locks. Check the se-

cure connection by pulling on the high-pres-

sure hose.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water net without

a system separator. Use a suitable sys-

tem separator manufactured by Kärcher; or, as

an alternative, a system separator as per EN

12729 Type BA.

Note: Impurities in the water can damage the

high-pressure pump and the accessories. For

protection, the use of the Kärcher water filter (op-

tional accessory, order no. 4.730-059) is recom-

mended.

Observe regulations of water supplier.

For connection values, see type plate/technical

data.

Î Use a fibre-reinforced water hose (not in-

cluded) with a standard coupling. (Minimum

diameter 1/2 inch (13 mm), minimum length

7.5 m).

Illustration

Î Screw the coupling unit (supplied) to the wa-

ter connection on the appliance.

Î Push the water supply hose onto the cou-

pling unit, then connect it to the water supply.

This high-pressure cleaner is suited to work with

the Kärcher suction hose with backflow valve

(Optional accessory, order no. 4.440-238) to

draw in surface water, e.g. from water butts or

ponds (see specifications for max. suction

height).

Î Fill the Kärcher suction hose with backflow

valve with water, screw to water supply and

hang into he water butt.

Î Separate the high pressure hose from the

high pressure connection point of the appli-

ance.

Î Switch the appliance on "I/ON" and operate

until the water exits the high-pressure con-

nection without bubbles.

Î Turn off the appliance "0/OFF".

Caution

Never operate the high-pressure cleaner when

the tap is turned off as dry running will damage

the high-pressure pump.

Illustration

Î Connect the high pressure hose to the high

pressure connection of the appliance.

Illustration

Î Push the spray lance into the trigger gun and

fasten it by turning it through 90°.

Commissioning and operation

Description of the Appliance

Special accessories

Before Startup

Water supply

Water supply from mains

Drawing in water from open reservoirs

Start up

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 3.98M Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info