Bedienungsanleitung Karcher K 4 Premium Power Control (Seite 13 von 162) (Alle Sprachen)

803268

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

English 13

Supplied screws and dowels

Illustration C

1Stand dowels (2 pieces)

2Screw M 4x22 (2 pieces)

3Screw M 4x16 (10 pieces)

Safety devices

몇CAUTION

Missing or modified safety devices

Safety devices are provided for your own protection.

Never modify or bypass safety devices.

Power switch

The power switch prevents unintentional operation of

the device.

High-pressure gun lock

The lock locks the lever of the high-pressure gun and

prevents the device from starting unintentionally.

Auto-stop function

If the lever of the high-pressure gun is released, the

pressure switch turns off the pump and the high-pres-

sure jet stops. The pump switches on again when the le-

ver is pressed.

Motor circuit breaker

The motor circuit breaker shuts off the device if power

consumption it too high.

Symbols on the device

Assembly

For the illustrations, refer to the graphics page.

Place the screws provided and matching screwdriver at

the ready.

Fit the supplied loose parts onto the device before start-

ing up the device.

Fitting the wheels

1. Insert the wheels.

Note

Pay attention to the alignment of the hole.

Illustration D

2. Secure the wheels with 1 screw each.

Mounting the stand

1. Insert the stand.

Illustration E

2. Insert the 2 dowels into the holes as far as they will

go.

3. Secure the base with 2 screws.

Installing the spray lance storage

1. Hang the spray lance storage in position.

2. Secure the storage with 2 screws.

Illustration F

3. Secure the cover with 4 screws.

Illustration G

Mounting the transport handle

1. Attach the transport handle.

Illustration H

2. Secure the transport handle with 2 screws.

Mounting the accessory net

1. Hang the accessory net on the hooks.

Illustration I

Push the high-pressure hose through the

hose guide

1. Insert the high-pressure hose through the hose

guide from the rear.

Illustration J

Installing the water connection coupling

1. Screw the water connection coupling onto the water

connection on the device.

Illustration K

Initial startup

1. Place the device on a flat and level surface.

2. For devices with a hose reel: Completely unwind the

high-pressure hose from the hose reel.

3. For devices without a hose reel: Unwind the high-

pressure hose completely and eliminate any loops

and twists.

4. Pull the high-pressure hose all the way forwards

through the hose guide.

5. Insert the high-pressure hose into the high-pressure

gun until it audibly latches into place.

Note

Take care to ensure the correct alignment of the nipple.

Illustration L

6. Check for a secure connection by pulling on the

high-pressure hose.

7. Plug the mains plug into a mains socket.

Water supply

For the connection values, see the type plate or chapter

Technical data.

Observe the water distribution company regulations.

ATTENTION

Damage through contaminated water

Contamination in the water can damage the pump and

the accessories.

KÄRCHER recommends using the KÄRCHER water fil-

ter for protection(special accessory, order number

4.730-059).

Connection to the water line

ATTENTION

Hose coupling with Aquastop on the water connec-

tion of the device

Damage to the pump

Never use a hose coupling with Aquastop on the water

connection of the device.

You can use an Aquastop coupling on the tap.

1. Plug the garden hose onto the water connection

coupling.

2. Connect the garden hose to the water line.

3. Open the water tap fully.

Illustration M

Sucking water from open containers

When used with the KÄRCHER suction hose with check

valve (special accessory, order number 2.643-100) this

high-pressure cleaner is suitable for sucking up surface

water, e.g. from rain barrels or ponds (for the maximum

suction height see chapter Technical data).

Do not aim the high-pressure jet may at per-

sons, animals, live electrical equipment or

the device itself.

Protect the device against frost.

The device may not be connected to the

public drinking water network.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 4 Premium Power Control Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info