Bedienungsanleitung Karcher K 5 Smart Control (Seite 16 von 200) (Alle Sprachen)

803267

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

16 English

Push the high-pressure hose through the

hose guide

1. Insert the high-pressure hose through the hose

guide from the rear.

Illustration K

Installing the water connection coupling

1. Screw the water connection coupling onto the water

connection on the device.

Illustration L

Initial Start-Up

Note

If you do not want to control the device by mobile device

via a Bluetooth®connection, you only have to follow the

steps in the section "Connecting the high-pressure

gun".

Download the app and register your device

1. Download the KÄRCHER Home & Garden app (see

chapter KÄRCHER Home & Garden app).

2. Start the KÄRCHER Home & Garden app.

3. Log in to the KÄRCHER Home & Garden app. If

necessary, create an account for this.

4. Scan the enclosed QR code.

The high-pressure cleaner is registered.

Note

If you do not have the enclosed QR code at hand, you

can also register the device with the part number and

serial number. Both numbers are given on the type

plate.

5. Follow the instructions of the KÄRCHER Home &

Garden app.

Note

Be sure to do this before connecting the high-pressure

gun Bluetooth® Activate on your mobile device.

Connecting the high-pressure gun

Note

You can find a detailed description of the connection at

https://www.kaercher.com/FCR.

6. Plug the mains plug for the high-pressure cleaner in-

to a socket.

The device switches to coupling mode for 60 s. Dur-

ing this time it is possible to couple the high-pres-

sure gun.

7. Press the "+" key and the "-" key on the high-pres-

sure gun simultaneously for at least 3 s.

If the coupling is successful, the pressure levels, as

well as the radio and the Bluetooth®symbol, will be

shown on the display.

Illustration M

The Bluetooth®connection between the mobile de-

vice and the high-pressure cleaner is established

automatically.

Note

If necessary, you can also establish the Bluetooth®con-

nection at a later time by pressing the "-" key for 10 s.

8. If the coupling attempt failed:

a Pull the mains plug for the high-pressure cleaner

out of the socket.

b Wait 20 s.

c Couple the high-pressure gun again.

Initial startup

1. Place the device on a flat and level surface.

2. For devices with a hose reel: Completely unwind the

high-pressure hose from the hose reel.

3. For devices without a hose reel: Unwind the high-

pressure hose completely and eliminate any loops

and twists.

4. Pull the high-pressure hose all the way forwards

through the hose guide.

5. Insert the high-pressure hose into the high-pressure

gun until it audibly latches into place.

Note

Take care to ensure the correct alignment of the nipple.

Illustration N

6. Check for a secure connection by pulling on the

high-pressure hose.

7. Plug the mains plug into a mains socket.

Water supply

For the connection values, see the type plate or chapter

Technical data.

Observe the water distribution company regulations.

ATTENTION

Damage through contaminated water

Contamination in the water can damage the pump and

the accessories.

KÄRCHER recommends using the KÄRCHER water fil-

ter for protection(special accessory, order number

4.730-059).

Connection to the water line

ATTENTION

Hose coupling with Aquastop on the water connec-

tion of the device

Damage to the pump

Never use a hose coupling with Aquastop on the water

connection of the device.

You can use an Aquastop coupling on the tap.

1. Plug the garden hose onto the water connection

coupling.

2. Connect the garden hose to the water line.

3. Open the water tap fully.

Illustration O

Sucking water from open containers

When used with the KÄRCHER suction hose with check

valve (special accessory, order number 2.643-100) this

high-pressure cleaner is suitable for sucking up surface

water, e.g. from rain barrels or ponds (for the maximum

suction height see chapter Technical data).

The water connection coupling is not required for vacu-

uming operation.

1. Fill the suction hose with water.

2. Screw the suction hose onto the device water con-

nection and hang it in a water source (e.g. water

butt).

Vent the device

1. Switch the device on "I/ON".

2. Unlock the lever of the high-pressure gun.

3. Press the lever of the high-pressure gun.

The device switches on.

4. Allow the device for run a maximum of 2 minutes un-

til the water escaping from the high-pressure gun is

free of air bubbles.

5. Release the lever of the high-pressure gun.

6. Lock the lever of the high-pressure gun.

Operation

ATTENTION

Pump running dry

Damage to the device

If pressure does not build up in the device after 2 min-

utes then switch the device off and proceed according

to the instructions in chapter Troubleshooting guide.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 5 Smart Control Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info