Bedienungsanleitung Karcher K 5.86 M (Seite 15 von 200) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478523

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

8 Deutsch

ƽ Danger

Turn off the appliance and remove the

mains plug prior to any care and mainte-

nance work.

The appliance is maintenance-free.

Prior to longer periods of storage, e.g. in the

winter:

Î Completely drain all water from the ap-

pliance: Switch the appliance on with

detached high-pressure hose and de-

tached water supply (max. 1 minute)

and wait, until no more water exits at the

high-pressure connection. Turn off the

appliance.

Î Remove filter from suction hose for de-

tergent and clean under running water.

Î Pull out the sieve in the water connec-

tion using flat-nose pliers and clean un-

der running water.

Caution

Protect the appliance and its accessories

against frost.

The appliance and its accessories can get

destroyed through frost if there are any wa-

ter residues in them. To avoid damage to

them:

Î Store the appliance and the entire ac-

cessories in a frost-safe room.

Use only original KÄRCHER spare parts.

You will find a list of spare parts at the end

of these operating instructions.

You can rectify minor faults yourself with

the help of the following overview.

If in doubt, please consult the authorized

customer service.

ƽ Danger

Turn off the appliance and remove the

mains plug prior to any care and mainte-

nance work.

Repair works may only be performed by the

authorized customer service.

Î Pull on the lever of the trigger gun; the

device will switch on.

Î Check whether the voltage indicated on

the type plate corresponds to the volt-

age of the mains supply.

Î Check the mains connection cable for

damages.

Î Check setting at the spray lance.

Î Appliance ventilation: Switch the appli-

ance on with the high-pressure hose de-

tached and operate (max. 2 minutes)

until the water exits the high-pressure

connection without bubbles. Switch off

appliance and reconnect high-pressure

hose.

Î Check the water supply.

Î Pull out the sieve in the water connec-

tion using flat-nose pliers and clean un-

der running water.

Cause: Voltage reduction due to weak

mains supply or when using an extension

cable.

Î When switching on, first pull the lever of

the trigger gun and then switch the ap-

pliance switch to "I/ON".

Î Clean high-pressure nozzle: Remove

dirt and debris from the nozzle bore, us-

ing a needle and rinse through with wa-

ter from the front.

Î Check water flow quantity.

Î Slight leakage from the appliance pump

is normal. If the leakage increases con-

tact the authorized customer service.

Maintenance and care

Maintenance

Storage

Frost protection

Spare parts

Troubleshooting

Appliance is not running

Pressure does not build up in the appli-

ance

Appliance does not start, motor hums

Strong pressure fluctuations

Appliance is leaking

English 15

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 5.86 M Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info