Bedienungsanleitung Karcher K 6.610 (Seite 18 von 264) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

477908

Zoom out

Zoom in

Vorherige Seite

1/264

Nächste Seite

– 8

10 Storage of Plug 'n' Clean detergent bot-

tle with detergent connection

11 Storage for accessories

12 Option

Storage hook for mains connection ca-

ble

13 Option

Automatic coiling for mains cable

14 Mains cable with mains plug

15 Plug 'n' Clean detergent bottle with

locking lid

16 Wheels

17 Trigger gun

18 Lock trigger gun

19 Key to detach the high pressure hose

from the trigger gun

20 Washing brush

21 Spray lance with Dirtblaster

22 Spray lance with pressure regulation

(Vario Power)

Special accessories expand the possibili-

ties of using your appliance. Please contact

your KÄRCHER dealer for further informa-

tion.

Mount loose parts delivered with appliance

prior to start-up.

Illustration

 Place the bottom holder into the recess-

es and push forward until it audibly

locks in.

Illustration

 Insert the top holder and push down all

the way.

Option

Illustration

 Install the top storage hook.

You will need the 2 included screws as well

as a Philips screwdriver PH 2.

Illustration

 Insert both detergent hoses onto the

hose fittings.

 Install the dosage regulator and con-

nect using 2 screws.

Illustration

 Wind up the high-pressure hose on the

hose drum.

Illustration

 Slide the free end of the coiled high

pressure hose through the recesses on

the dosage regulator.

Illustration

 Attach the transport handle, insert the

bolts into the bores and screw them in.

Illustration

 Press the connecting fitting from the

short high pressure hose into the brass

intake until it locks into place audibly.

Check the secure connection by pulling

on the high pressure hose.

Illustration

 Push the high pressure hose into the

trigger gun until it locks audibly.

Note: Make sure the connection nipple

is aligned correctly.

Check the secure connection by pulling

on the high pressure hose.

ṇ Warning

According to the applicable regula-

tions, the appliance must never be

used on the drinking water supply

without a system separator. Use a

suitable system separator manufactured by

KÄRCHER; or, as an alternative, a system

separator as per EN 12729 Type BA. Water

flowing through a system separator is con-

sidered non-drinkable.

Caution

Always connect the system separator to

the water supply, never directly to the appli-

ance!

Note: Impurities in the water can damage

the high-pressure pump and accessories.

For protection, the use of the KÄRCHER

water filter (optional accessory, order no.

4.730-059) is recommended.

Special accessories

Before Startup

Install the storage for hand-spray gun

Install the storage hook for the mains

connection cable

Install the dosage regulator for

detergent

Install the transport handle

Connect the high pressure hose to the

hand spray gun

Water supply

18 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 6.610 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info