Bedienungsanleitung Karcher K 6.760 (Seite 17 von 264) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

477910

Zoom out

Zoom in

Vorherige Seite

1/264

Nächste Seite

– 7

 Do not operate the appliance at temper-

atures below 0 °C.

 Observe a distance of at least 30 cm

when using the jet to clean painted sur-

faces to avoid damaging paintwork.

 Never leave the appliance unattended

when it is in operation.

 Make sure that the power cable or ex-

tension cables are not damaged by run-

ning over, pinching, dragging or similar.

Protect the power cable from heat, oil,

and sharp edges.

 All current-conducting parts in the work-

ing area must be protected against jet

water.

 The appliance may only be connected

to an electrical supply which has been

installed in accordance with IEC 60364.

 The appliance may only be connected

to alternating current. The voltage must

correspond with the type plate on the

appliance.

 For safety reasons, we recommend that

you operate the appliance only via a

earth-leakage circuit breaker (max.

30 mA).

 Cleaning operations which produce oily

waste water, e.g. engine washes, un-

derbody washes, may only be carried

out using washing stations equipped

with an oil separator.

 This appliance was designed to be

used with detergents which are sup-

plied or recommended by the manufac-

turer. The use of other detergents or

chemicals may compromise the safety

of the appliance.

Caution

Safety devices protect the user and must

not be modified or bypassed.

The appliance switch prevents unintention-

al operation of the appliance.

This lock locks the lever of the trigger gun

and prevents the inadvertent start of the ap-

pliance.

The overflow valve prevents the permissi-

ble working pressure from being exceeded.

If the lever on the trigger gun is released

the pressure switch turns off the pump, the

high-pressure jet is stopped. If the lever is

pulled the pump is turned on again.

Caution

Create stability for the appliance prior to all

work on or with the appliance to prevent ac-

cidents or damage.

– The stability of the appliance is warrant-

ed when it is placed onto an even sur-

face.

The scope of delivery of your appliance is il-

lustrated on the packaging. Check the con-

tents of the appliance for completeness

when unpacking.

In the event of missing accessories or any

transport damage, please contact your

dealer.

These operating instructions describe the

basic models of the high pressure cleaners

shown on the front cover.

These operating instructions describe the

maximum equipment. Depending on the

model, there are differences in the scopes

of delivery (see packaging).

Illustrations on fold-out

pages!

1 Coupling element for

water connection

2 Water connection with integrated sieve

3 Appliance switch "0/OFF“/ „I/ON“

4 High pressure hose

5 Dosage regulator for detergent

6 Storage for trigger gun

7 High-pressure hose drum

8 Transport handle

9 Hand crank for hose drum

Safety Devices

Power switch

Lock trigger gun

Overflow valve with pressure switch

Prerequisites for the appliance's

stability

Operation

Scope of delivery

Description of the Appliance

17EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 6.760 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info