Bedienungsanleitung Karcher K 6.85 M PLUS (Seite 12 von 196) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

78171

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

12 English

Safety devices serve to protect the user

and must not be rendered inoperational or

their functions bypassed.

The switch prevents unintented starting of

the appliance. Stop the appliance during

breaks or after operation.

The safety catch on the trigger gun pre-

vents the appliance from being switched on

unintentionally.

Definition of abbreviations used:

HP = High pressure

DT = Detergent

When unpacking the product, make sure

that no accessories are missing and that

none of the package contents have been

damaged. If you detect any transport dam-

ages please contact your dealer.

Illustrations on Page 2

1 Carrying handle

2 Coupling element for water connection

3 Connection for water supply with filter

4 ON/OFF switch for appliance

5 Storage, trigger gun

6 DT tank

7 DT metering regulator

8 Transport handle

9 Accessory mount

10 Storage compartment for mains cable

11 Power cable with plug

12 HP hose reel with handle

13 Trigger gun with safety catch

14 HP hose

15 Washing brush

16 Spray lance with pressure regulation

(Vario Power)

Figures 1-9

Î Attach the lose individual parts to your

high pressure cleaner.

Figures 10-11

Î Push out the safety clip in the trigger

gun using e.g. a small screwdriver.

Î Join HP hose and trigger gun together.

Î Push clip in until it engages and check

that it is securely fastened by pulling on

the HP hose.

According to the applicable regula-

tions, the appliance must never be

used on the drinking water net

without a system separator. Use a

suitable system separator manufactured by

Kärcher; or, as an alternative, a system

separator as per EN 12729 Type BA.

For connection values, see type plate/tech-

nical data.

Observe regulations of water supplier.

Î Use a fibre-reinforced hose (not includ-

ed) with a standard coupling:

- Minimum diameter, 1/2 inches (13 mm)

- Minimum length, 7.5 m.

Î Screw the coupling unit (supplied) to

the water connection on the appliance.

Î Push the water supply hose onto the

coupling unit, then connect it to the tap.

ṇ Caution

Never operate the high-pressure cleaner

when the tap is turned off as dry running will

damage the HP pump.

If the water supply is not clean, the Kärcher

water filter must be used (special accesso-

ry - order No. 4.730-059).

When fitted with the appropriate accesso-

ries, this high-pressure cleaner can draw in

surface water, e.g. from water butts or

ponds (max. suction height 0.5 m).

Î As the standard coupling system is not

suitable for use in suction mode, the

Safety Devices

Power switch

Safety catch

Commissioning and operation

Description of the Appliance

Before Startup

Water supply

Water supply from mains

Drawing in water from open reservoirs

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K 6.85 M PLUS Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info