Bedienungsanleitung Karcher k 7 960 m (Seite 14 von 192) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

381906

Zoom out

Zoom in

Vorherige Seite

1/192

Nächste Seite

14 English

ded) with a standard coupling: - Mini-

mum diameter, 1/2 inches (13 mm). -

Minimum length, 7.5 m.

Î Screw the coupling unit (supplied) to the

water connection on the appliance.

Î Push the water supply hose onto the

coupling unit, then connect it to the tap.

ṇ Caution

Never operate the high-pressure cleaner

when the tap is turned off as dry running will

damage the HP pump.

If the water supply is not clean, the Kärcher

water filter must be used (special accessory

- order No. 4.730-059).

When fitted with the appropriate accesso-

ries, this high-pressure cleaner can draw in

surface water, e.g. from water butts or ponds

(max. suction height 0.5 m).

Î Use the Kärcher water filter to protect the

HP pump and accessories (special ac-

cessories). This filter removes dirt from

incoming water.

Î As the standard coupling system is not

suitable for use in suction mode, the

Kärcher suction hose with integrated fil-

ter should be used instead (special ac-

cessory) and suspended inside the

water butt.

Î Remove air from appliance before ope-

ration: Switch on the appliance when the

HP hose is not connected and run it until

the water which discharges from the HP

outlet is free of bubbles. Switch off ap-

pliance and connect HP hose.

Î Screw HP hose on to HP outlet on ap-

pliance.

Î Push the appropriate spray lance on to

the handgun and fasten it by turning it to

the right through 90°.

Î Open tap.

Î Plug in mains plug.

Î Set main switch to “I/ON”.

Î Press safety catch on the handgun to re-

lease it and pull lever.

ṇ Risk of injury

The handgun is subjected to a recoil force

when the water jet is discharged. Make sure

that you have a firm footing and are also hol-

ding the handgun and spray lance firmly.

Î Carrying out the most common cleaning

tasks.

Operation with detergents is possible

with low pressure (–)

Î for particularly stubborn stains.

Operation with detergents not possible

Note:

Detergent can only be added when the ap-

pliance is being operated in low pressure

mode.

All washing brushes supplied by Kärcher are

designed for use with detergents.

Î Turn Variopower nozzle until lowest

pressure setting has been reached (–).

During low pressure operation, detergent is

automatically drawn in from the filled deter-

gent tank.

Î Fill the detergent reservoir with:

- Detergent tablet and water or

- Detergent concentrate and water.

Observe metering recommendations on

the packaging label of the detergent.

Î Meter out the cleaning agent (cleaning

agent metering valve)

– medium quantity: centre-position

– large quantity: “+” position

– small quantity: “–” position.

1 Spray a small dose of the detergent on

the dry surface, and allow it to react

(make sure the detergent does not dry

up).

2 Wash off the loosened dirt using the

high-pressure jet.

Water supply from open reservoirs

Start up

High pressure operation

Spray lance with Variopower nozzle

Spray lance with dirt blaster

Operation with detergent

DT suction infeed from DT tank

Recommended Cleaning Method

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher k 7 960 m Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info