Bedienungsanleitung Karcher K3001 (Seite 12 von 42) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478388

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

English K 3001

Preparing the cleaner

for use

■ Release both locking knobs (turn clockwise),

and lift motor housing off dirt box.

■ Push both wheels onto their mountings until

they snap into place.

■ Push both swivel castors onto their mountings

until they snap into place.

■ Push the accessory holder into its mounting

until it snaps into place.

n Put the motor housing on the dirt box and

lock it in place (turn the locking knobs

counter-clockwise as far as possible).

Connecting the accessories

■ Insert spraying and suction hose, and press

until it snaps into place.

■ Connect coupling on spraying and suction

hose, and press until it snaps into place

■ Attach required accessory to spraying and

suction hose or to suction tubes. If necessary

engage the catch.

Note: The appropriate additional accessory to be fitted

depends upon the actual cleaning task. Read the next

section of these instructions for further information.

How to use the cleaner

Wet cleaning

Carpets/Hard surfaces

(Spraying on cleaning agents and vacuuming

them off in one continuous process)

Attention: Do not clean parquet floors in this way

(moisture can penetrate the material and damage the

floor).

Accessories required

– Spraying and suction hose with handle

– Suction tubes (e.g. for cleaning the floor)

– Spray-hex nozzle without hard-surface

adapter for carpets

– Spray-hex nozzle with hard-surface adapter

for hard surfaces.

Mixing a detergent solution

Attention: Avoid any damage to health or property

by observing all the information provided with the

cleaning agents that are to be used.

n Removal of mites:

To eliminate mites we recommend our

specially developed cleaning agent Mitex RM

765 **. Depending on the textile type, tests

show that mites are removed for 6 - 9

months.

n For cleaning please use only the original

Kärcher cleaning agent RM760 **. This is

suitable for all textile cleaning processes.

n Dissolve half of the supplied test pack (or 1/2

the RM 760 measuring beaker) in 5 litres of

water and pour this mixture into the detergent

reservoir.

Getting started

■ Empty dirt box

■ Fit detergent reservoir

■ Mount motor housing onto dirt box, and lock

in place

■ Plug into mains socket

■ Switch on suction turbine

■ Switch on spray pump

Attention: If the detergent reservoir is empty, switch

off the spray pump (pump could become damaged). If

you are not working with the pump, switch this off at

the ON/OFF switch.

■ To spray detergent – press and hold button

on handle.

■ Place spray-hex nozzle on floor, and draw

backwards along surface to be cleaned. Tiles

are best cleaned diagonally across the joints.

** Special accessory

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K3001 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info