Bedienungsanleitung Karcher K4 ecologic (Seite 19 von 274) (Alle Sprachen)

576556

Zoom out

Zoom in

Vorherige Seite

1/274

Nächste Seite

– 9

Note: During installation you must

make sure that the tongues of the dos-

age regulator match up with the intend-

ed recesses in the casing.

Illustration

 Push the high pressure hose into the

trigger gun until it locks audibly.

Note: Make sure the connection nipple

is aligned correctly.

Check the secure connection by pulling

on the high pressure hose.

For connection values, see type plate/tech-

nical data.

Observe regulations of water supplier.

ṇ WARNING

According to applicable regulations, the ap-

pliance must never be used on the drinking

water net without a system separator. A

suitable system separator by KÄRCHER or

alternatively a system separator according

to EN 12729 type BA must be used.

Water that has flown through a system sep-

arator is no longer classified as drinking

water.

ATTENTION

Always connect the system separator to

the water supply, never directly to the appli-

ance!

Illustration

 Screw the coupling element to the wa-

ter connection on the appliance.

 Attach the water supply hose to the

coupling on the water connection.

Note: The supply hose is not included.

 Connect the water supply hose to the

water supply.

 Completely open the water tap.

Note: The max. suction height is 0.5 m.

ATTENTION

Impurities in the water can damage the

high-pressure pump and the accessories.

For protection, the use of the KÄRCHER

water filter (optional accessory, order no.

4.730-059) is recommended.

 Fill the suction hose with water.

Illustration

 Screw the suction hose into the water

connection of the appliance and insert it

into the water source (e.g. rainwater

drum).

ATTENTION

Dry running of more than 2 minutes leads to

damage of the high-pressure pump. If the

appliance does not build up pressure within

2 minutes, switch the appliance off and pro-

ceed in accordance with the instructions in

Chapter "Troubleshooting".

Illustration

 Push the high pressure hose into the

quick coupling until it locks audibly.

Note: Make sure the connection nipple

is aligned correctly.

 Check the secure connection by pulling

on the high pressure hose.

 Insert the mains plug into the socket.

 Turn on the appliance “I/ON”.

 Unlock the lever on the trigger gun.

 Pull on the lever of the trigger gun; the

device will switch on.

Switch the appliance on for a (max. of 2

minutes) and wait until the water exits at

the hand spray gun without bubbles.

 Release the lever on the trigger gun.

Note: Release the lever of the trigger

gun; the device will switch off again.

High pressure remains in the system.

 Lock the lever on the trigger gun.

Connect the high pressure hose to the

trigger gun

Water supply

Water supply from mains

Drawing in water from open reservoirs

Start up

19EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher K4 ecologic Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info