Bedienungsanleitung Karcher LBB 1060-36 Bp (Seite 14 von 188) (Alle Sprachen)

804765

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

14 English

Rechargeable battery pack

The device can be operated with two 36 V Kärcher Bat-

tery Power+ battery packs.

Installation

Device assembly

몇WARNING

Risk of injury due to incompletely assembled de-

vice

Only operate the appliance once it is fully assembled

and functional.

1. Mount the bellows on the casing.

a Push one end of the bellows over the casing pipe

so that the raised burr on the pipe fits securely in-

to the slot on the bellows.

Illustration B

b Insert the sheathed cable into the recess in the

pipe clamp.

c Fit the parts of the pipe clamp on the pipe above

and below the bellows so that the sheathed cable

is not pinched.

d Insert a screw in the pipe clamp on the side that

is closest to the device and tighten with the sup-

plied assembly tool.

Illustration C

e Insert the second screw in the other side of the

pipe clamp and tighten with the assembly tool

provided.

2. Mounting the connection pipe on the bellows.

a Push the connection pipe into the bellows so that

the raised burr on the pipe fits securely into the

slot on the bellows.

Illustration D

b Insert the sheathed cable into the recess in the

pipe clamp.

c Fit the parts of the pipe clamp on the pipe above

and below the bellows so that the sheathed cable

is not pinched.

d Insert a screw in the pipe clamp on the side that

is closest to the device and tighten with the sup-

plied assembly tool.

Illustration E

e Insert the second screw in the other side of the

pipe clamp and tighten with the assembly tool

provided.

3. Mount the blower pipe nozzle.

a Slide the cutouts on the nozzle over the lugs on

the blower pipe.

Illustration F

b Turn the nozzle so that the two arrows point to-

wards each other.

The nozzle is latched in position.

4. Mount the blower pipe.

a Slide the cutouts on the blower pipe over the lugs

on the device.

Illustration F

b Turn the blower pipe so that the two arrows point

towards each other.

The blower pipe is latched in position.

Changing the position of the handle

The position of the handle can be adjusted to the needs

of the operator.

1. Change the position of the handle.

Illustration G

a Release the locking screw.

b Slide the handle on the pipe.

c Tighten the locking screw.

Operation

몇WARNING

Risk of injury due to incompletely assembled de-

vice

Only operate the appliance once it is fully assembled

and functional.

몇CAUTION

Risk of injury from objects flying about

Wear safety goggles and suitable protective gloves for

all work with the device.

Control elements

The leaf blower has the following control elements:

●A power switch for switching the device on and off.

The speed is regulated via the power switch, de-

pending on how strongly it is pressed.

●A lever for fixing the speed to set the speed of the air

flow.

●A turbo boost button to maximise the air speed that

has been set via the speed fixing function. The

boost mode remains active for 2 minutes, then auto-

matically returns to normal operation.

●A locking screw to change the position of the han-

dle.

Inserting the battery pack

ATTENTION

Dirty contacts

Damage to the device and battery

Check the battery mount and the contacts for soiling

and clean them as necessary before inserting the bat-

tery.

Illustration H

1. Push the battery pack into the respective mount in

the device until it audibly latches into place.

Donning the carrying harness

Note

The carrying harness must be worn over both shoul-

ders.

1. Adjust the height of the click fastener by moving the

buckles on the belt.

2. Snap the belt click buckle into place.

3. Pull the strap ends tight so that the harness fits

snugly.

Switching on the device

몇CAUTION

Risk of injury from flying parts and hearing damage

due to noise

Always wear eye and hearing protection.

1. Insert the battery pack, see chapter Inserting the

battery pack.

2. Press the trigger.

Illustration I

3. Fix the speed.

Illustration J

a Use the speed fixing function to adjust the

amount of airflow.

b If necessary, press the turbo boost button for

maximum flow speed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher LBB 1060-36 Bp Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info