Bedienungsanleitung Karcher MT CS 250-36 (Seite 12 von 196) (Alle Sprachen)

804769

Zoom out

Zoom in

Vorherige Seite

1/196

Nächste Seite

12 English

erly. Check for loose locks, make sure all protective cov-

ers and handles are properly and securely fastened.

Only use the device when it is in a correct condition.

● Replace any worn or damaged parts before operating

the device. ● Never use the device if the trigger on the

handle does not switch on and off correctly. ● Risk of

kickback due to loss of balance. Avoid an abnormal pos-

ture, keep a stable, safe footing and maintain your bal-

ance. ● Serious injuries due to negligence through

familiarity with the device due to frequent use. ● Imme-

diately stop the device and check for damage or identify

the cause of the vibration if the device has been

dropped, hit or vibrates abnormally. Have damage re-

paired by the authorised Customer Service or replace

the device.

몇CAUTION ● Wear full eye protection and hear-

ing protection, strong and sturdy gloves and head pro-

tection when operating the device. Wear a face mask

when the work is dusty. ● Wear long, heavy trousers,

sturdy shoes and well-fitting gloves when working with

the device. Do not work barefoot. Do not wear any jew-

ellery, sandals or short trousers. ● Risk of injury when

loose fitting clothing, hair or jewellery is caught by mov-

ing parts of the device. Keep clothing and jewellery

away from moving parts of the device. Tie long hair

back. ● Hearing protection can impair your ability to

hear warning sounds, so pay attention to hazards in

your vicinity and in the work area. ● The operation of

similar tools in the environment increases the risk of

hearing damage and the likelihood of failing to hear po-

tential hazards, e.g. people entering your work area.

● Slippery handles and gripping surfaces prevent safe

operation and control of the device in unexpected situa-

tions. Keep handles and gripping surfaces dry, clean,

and free from oil and grease. ● Only use accessories

and spare parts which are approved by the manufactur-

er. Only original accessories and original spare parts

ensure that the appliance will run fault-free and safely.

Safety precautions for pole saws

몇WARNING ● Do not use the device if there is

a danger of lightning. ● Ensure that all protective devic-

es and handles are correctly fitted, securely fastened

and in good condition. ● Ensure a firm footing, a clean

workplace and plan a retreat path from falling branches

before using the device. ● Beware of exhaust fumes, oil

vapour and sawdust. If necessary, wear a mask or

breathing apparatus. ● Always hold the branch cutter

with both hands. Hold the front handle with one hand.

Hold the rear handle firmly with the other hand, operate

the trigger lockout button and the trigger. ● Risk of elec-

tric shock if the saw chain comes into contact with hid-

den power lines. Hold power tools only by the insulated

gripping surfaces, as the contact with live cables can

make the metal parts of the device live. ● Risk of injury.

Do not make any modifications to the device. Do not use

the device to drive attachments or devices not recom-

mended by the manufacturer of the device.

Kickback may occur when the nose or tip of the guide

rail touches an object, or when the wood bends and

jams the saw chain in the cut. Tip contact may cause a

sudden reverse reaction in some cases, kicking the

guide rail up and back towards the operator. Jamming

of the saw chain in the top of the guide rail may push the

rail rapidly back towards the operator. Any of these re-

actions can lead to a loss of control.

몇WARNING ● Serious injuries due to loss of

control through a kickback. Do not rely solely on the

built-in safety devices, but take appropriate measures to

work accident-free and injury-free. ● You must wear the

carrying belt provided when using the device. The car-

rying belt is fitted with a quick-release buckle. The car-

rying belt helps you to control the device when it is

lowered after cutting and to hold the weight of the device

during cutting. ● Serious injuries if the carrying belt

cannot be removed quickly enough in an emergency.

Familiarize yourself with the carrying belt and the quick-

release buckle before using the device. Do not wear

clothing over the shoulder strap or otherwise interfere

with access to the quick-release buckle. ● Before

switching on the device, make sure that the saw chain

does not touch any objects. ● Serious injuries if a

wrongly tensioned saw chain jumps out of the guide rail.

Check the chain tension before each use. Make sure

the chain is oiled. ● Switch the motor off, remove the

battery pack and make sure that all moving parts have

stopped moving:

●Before cleaning the device or removing a blockage.

●When leaving the device unattended.

●Before mounting or removing attachments.

●Before checking, cleaning or working on the device.

● Risk of injury due to kickback. Measures to prevent

a kickback:

●Make sure your work area is clear of obstacles.

●Avoid any contact of the guide tip with branches,

twigs or other objects while working with the branch

cutter.

●Hold the device with both hands.

●Position your body and arms so that you can resist

kickback forces.

●Never let go of the branch cutter during operation.

●Avoid unnatural postures. This gives you more con-

trol over the branch cutter and prevents unintention-

al contact with the tip of the bar in unexpected

situations.

●Only use the replacement bars and chains recom-

mended by the manufacturer. Incorrect replacement

bars and chains may cause chain breakage and/or

kickback.

●Sharpening the saw chain is a challenging task. The

manufacturer recommends replacing a worn or dull

chain with a new saw chain.

● Risk of injury. Do not use the device on ladders or un-

stable surfaces. Always stand with both legs on firm

ground to keep your balance when cutting. ● Risk of

electric shock. Do not work with the device within 10 m

of overhead lines. ● Risk of injury if a branch under ten-

sion snaps back when cutting. ● Watch for falling

branches and branches that spring back after falling to

the ground. ● The operator can lose their balance if thin

wood gets caught in the saw and flies in the direction of

the operator. Be careful when sawing small shrubs and

saplings. ● Turn off the motor and remove the battery

pack before cleaning or servicing the device. ● Check

the saw teeth if the cutting performance diminishes.

Keep the cutting tools sharp and clean. Sharp cutting

tools are easier to control and do not block so easily. If

necessary, replace the chain and the bar. Only use orig-

inal spare parts from the manufacturer. ● Risk of injury

due to a jammed cutting device. If the saw chain or

guide rail has become trapped too high to reach, seek

the advice of a professional arborist to safely remove

the cutting device. ● Before each use, check that the

Karcher MT CS 250-36 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info