Bedienungsanleitung Karcher MT HT 550-36 (Seite 12 von 176) (Alle Sprachen)

804770

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

12 English

cannot be removed quickly enough in an emergency.

Familiarize yourself with the carrying belt and the quick-

release buckle before using the device. Do not wear

clothing over the shoulder strap or otherwise interfere

with access to the quick-release buckle. ● Risk of elec-

tric shock. Do not work with the device within 10 m of

overhead lines. ● Do not operate the device in the vicin-

ity of posts, fences, buildings or other immovable ob-

jects. ● The blades on the device are sharp. Wear

sturdy protective gloves and work carefully when install-

ing, replacing, cleaning or checking the seating of

screws. ● Replace any worn or damaged parts before

operating the device. ● Immediately stop the device

and check for damage or identify the cause of the vibra-

tion if the device has been dropped, hit or vibrates ab-

normally. Have damage repaired by the authorised

Customer Service or replace the device. ● Before each

use, check that the shaft connection of the rod and the

cutting tool are securely fastened. ● Before cutting a

hedge or a bush, check if people or animals are behind

or in it. ● Switch the motor off, remove the battery pack

and make sure that all moving parts have stopped mov-

ing:

●Before adjusting the working position of the cutting

tool.

●Before cleaning the device or removing a blockage.

●Before leaving the device unattended.

●Before checking, maintaining or working on the de-

vice.

몇CAUTION ● Wear especially safety glasses

and hearing protection. ● Wear head protection when

working in areas with a danger of falling objects. ● Risk

of injury when loose fitting clothing, hair or jewellery is

caught by moving parts of the device. Keep clothing and

jewellery away from moving parts of the device. Tie long

hair back. ● Check that the cutting tool cannot come into

contact with anything before starting the device. ● Do

not use the device on ladders or unstable surfaces.

● Hearing protection can impair your ability to hear

warning sounds, so pay attention to hazards in your vi-

cinity and in the work area. ● The noise from the device

can impair your ability to hear, so pay attention to possi-

ble hazards in your vicinity and in the work area.

ATTENTION ● Do not force the device through

dense bushes. This can block and slow down the cutting

tool. Reduce the working speed if the cutting tool blocks.

● Do not attempt to cut boughs and branches that are

obviously too large to fit between the cutting blades.

Use a non-motorised hand saw or branch saw for cut-

ting larger boughs and branches.

Safe transport and storage

몇WARNING ● Switch the device off, allow it to

cool down and remove the battery pack before storage

or transportation.

몇CAUTION ● In order to prevent accidents or

injuries, you must only transport and store the device

with the blade guard installed and with the rechargeable

battery removed. ● Risk of injury and damage to the de-

vice. Secure the device against movement or falling

down during transport. ● Store the battery pack sepa-

rately from the device for safety.

ATTENTION ● Remove all foreign bodies from the

device before storage or transportation. ● Store the de-

vice in a dry, well ventilated location out of the reach of

children. Keep the device away from corrosive sub-

stances such as garden chemicals. ● Do not store the

device outdoors.

Safe servicing and care

몇WARNING ● Switch the motor off, remove the

battery pack and make sure that all moving parts have

stopped moving:

●Before cleaning or servicing the device.

●Before changing accessories.

● Risk of injury from sharp cutting tools. Exercise spe-

cial care when removing and fitting the blade guard,

cleaning and oiling the device. ● Ensure that the device

is in a safe condition by regularly checking that all bolts,

nuts and screws are screwed tight. ● Each time after us-

ing the device, remove dirt from the cutting tools using

a hard brush and apply a suitable oil for rust protection

before fitting the blade guard. The manufacturer recom-

mends using a spray for rust protection and oiling. Ask

your Customer Service department to recommend a

suitable spray. You can oil the cutting tools as de-

scribed, each time before using the device.

몇CAUTION ● Only use accessories and spare

parts which are approved by the manufacturer. Only

original accessories and original spare parts ensure that

the appliance will run fault-free and safely.

ATTENTION ● Clean the product with a soft, dry

cloth each time after use.

Note ● Service and maintenance work may only be

performed by suitably qualified and specially trained

personnel. We recommend sending the product to an

authorised service centre for repair. ● You may only

perform the adjustments and repairs described in these

operating instructions. Contact your authorised Cus-

tomer Service department for other repairs.

Residual risks

몇WARNING

●Certain residual risks remain present, even when the

device is operated in the prescribed manner. The fol-

lowing dangers can be present when using the de-

vice:

●Severe injuries through contact with the cutting tool.

Keep the cutting tool away from your body. Use the

blade guard when not cutting.

●Vibration can cause injuries. Use the correct tools

for the job, use the handles provided and restrict the

working time and hazard exposure time.

●Noise can cause hearing injuries. Wear hearing pro-

tection and limit the duration of exposure.

Risk reduction

몇CAUTION

●Using the device for longer periods can cause poor

circulation in the hands due to vibrations. A general

period of use cannot be set, because this depends on

several influencing factors:

●Personal tendency to suffer from poor circulation

(frequently cold fingers, tingling sensation in the fin-

gers)

●Low ambient temperature. Wear warm gloves to

protect your hands.

●Holding the device too tightly hindering blood circu-

lation.

●Continuous operation is more harmful than opera-

tion interrupted by work breaks.

Karcher MT HT 550-36 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info