Bedienungsanleitung Karcher NT 30-1 Tact Te H (Seite 19 von 204) (Alle Sprachen)

804521

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

English 19

5. When removing the flat fold filter, wrap it immediate-

ly with the bag provided and seal it. Order number

for bag: 6.592-049.0

6. Dispose of used flat fold filter in dust-tight bag in ac-

cordance with statutory regulations.

7. Remove any dirt deposits from the clean air side.

8. Clean the filter frame and the supporting surface of

the filter frame with a damp cloth.

9. Fit the new flat fold filter. During insertion, ensure

that the flat fold filter is flush on all sides.

10. Insert the filter frame.

11. Close the filter cover until it audibly latches into

place.

12. Press in both fastening pins of the filter cover with a

screwdriver and tighten clockwise.

Changing the safety filter bag

DANGER

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

Accumulated dust must be transported in dust-proof

containers. Do not transfer the contents. Waste that

contains asbestos must be disposed of in accordance

with the instructions and rules for waste disposal. The

dust bag may only be disposed of by qualified staff.

1. Close the suction connection, see wet vacuum

cleaning.

Illustration G

2. Unlock and remove the suction head.

3. Pull safety filter bag on the flange up and out.

Illustration H

4. Seal the suction connection opening of the safety fil-

ter bag tightly with a sealing cap.

5. Fold up the safety filter bag.

Illustration I

6. Take off the protective film and close the ventilation

hole (1x NT 30/1 - 2x NT 40/1, NT 50/1) with a self-

adhesive tab.

Illustration J

7. Close the safety filter bag tightly with the attached

cable tie.

8. Remove the safety filter bag.

9. Clean the container inside with a moist cloth.

10. Dispose of used safety filter bag in dust-tight bag in

accordance with statutory regulations.

11. Pull the new safety filter bag over the container.

Illustration C

12. Attach the safety filter bag.

Illustration D

13. Fit and lock the suction head.

Changing the dust bag

1. Close the suction connection, see wet vacuum

cleaning.

Illustration G

2. Unlock and remove the suction head.

3. Fold up the dust bag.

Illustration K

4. Take off the protective film and close the ventilation

hole with a self-adhesive tab.

5. Seal the dust bag tightly underneath the opening us-

ing cable ties.

6. Remove the dust bag.

7. Clean the container inside with a moist cloth.

8. Dispose of the dust bag in accordance with statutory

regulations.

9. Fit the new dust bag.

Illustration E

10. Pull the dust bag over the container. Ensure that the

marking line is within the container and the ventila-

tion hole is positioned on the back wall of the con-

tainer.

11. Fit and lock the suction head.

Cleaning/replacing the cooling air filter

1. Allow the appliance to cool down.

2. Unlock the cooling air flaps with a screwdriver and

fold them out.

Illustration T

3. Clean (vacuum, wash) or replace the cooling air fil-

ter.

4. Fold the cooling air flaps in and latch it into place.

Cleaning the electrodes

1. Unlock and remove the suction head.

2. Clean the electrodes with a brush.

3. Fit and lock the suction head.

Troubleshooting guide

DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Remove the mains plug.

Note

The device must be switched off immediately if a mal-

function occurs (e.g. filter breakage). The malfunction

must be eliminated before switching the device on

again.

Suction turbine does not start up

1. Check the socket and the power supply fuse.

2. Check the mains cable, mains plug, electrodes and

power socket on the device.

3. Switch on the device.

Suction turbine switches off

1. Empty the container.

2. Fit the new flat fold filter.

Suction turbine does not switch on again after emp-

tying the container

1. Switch off the device and wait for 5 seconds. Switch

on the device.

2. Clean the electrodes with a brush.

Suction power decreases

1. Remove any blockages from the suction nozzle,

suction pipe, suction hose or flat fold filter.

2. Dispose of the filled safety filter bag.

3. Dispose of the filled dust bag.

4. Correctly engage the filter cover.

5. Replace the flat fold filter.

6. NT 50/1 only: Check the drain hose for leaks.

Escaping dust when vacuuming

1. Check that the flat fold filter is correctly fitted and

correct if necessary.

Illustration U

2. Replace the flat fold filter.

The automatic switch-off mechanism (wet vacuum

cleaning) does not trigger

1. Clean the electrodes with a brush.

2. Continuously monitor the filling level when vacuum-

ing non-conductive liquids.

Horn sounds - intermittent tone

1. Set the turn switch to the correct hose cross-section.

2. The safety filter bag must be replaced when it is full

and the air flow drops below the specified minimum

flow rate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 30-1 Tact Te H Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info