Bedienungsanleitung Karcher NT 40-1 Ap L (Seite 15 von 176) (Alle Sprachen)

804077

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

English 15

6. Dispose of the dust bag (special accessory) in ac-

cordance with statutory provisions.

7. Fit and lock the suction head.

Draining the waste water

NT 50/1 only:

1. Drain the waste water via the drain hose.

Illustration H

General

●We recommend not using the "Semi-automatic filter

dedusting" function button when vacuuming wet dirt

with the crevice nozzle or upholstery nozzle (option-

al) when sucking mainly water out of a container.

●The device switches off automatically when the

maximum fluid level is reached.

●When vacuuming non-conductive liquids (e.g. drill

emulsion, oils and grease) the device does not au-

tomatically switch off when the container is full. The

filling level must be continuously monitored and the

container emptied on a timely basis.

●On completion of wet vacuum cleaning: Clean the

main filter element using the filter cleaning. Clean

the electrodes with a brush. Clean the container with

a moist cloth and dry it off.

Clip connection

The suction hose is equipped with a clip system. All ac-

cessory parts with a nominal width of 35 mm can be

connected.

Illustration I

Operation

Switching on the device

1. Connect the mains plug.

2. Switch on the device at the turn switch.

Working with power tools

Only for devices with a built-in socket:

DANGER

Danger of electric shock

Risk of injury and damage.

The socket is only intended for direct connection of pow-

er tools to the vacuum cleaner. Any other use of the

socket is prohibited.

1. Plug the mains plug of the power tool into the power

socket on the vacuum cleaner. The vacuum cleaner

is in Standby mode.

2. Switch on the device at the turn switch.

Note

The vacuum cleaner is automatically switched on and

off with the power tool.

Note

The vacuum cleaner has a startup delay of up to 0.5

seconds and an after-running time of up to 15 seconds.

Note

See the Technical data for the permissible power rating

of the power tool.

3. Remove the angle piece from the suction hose.

Illustration J

4. Install the tool adapter on the suction hose.

5. Connect the tool adapter to the power tool.

Illustration K

Semi-automatic filter dedusting

Note

Actuating the filter dedusting every 5-10 minutes ex-

tends the working time of the main filter element.

Note

The semi-automatic filter dedusting can only be

switched on when the device is switched on.

1. Press the semi-automatic filter dedusting button 5x.

The main filter element is then cleaned by a blast of

air (pulsing sound).

2. Power dedusting (for particularly severe contamina-

tion of the main filter element): Close off the suction

pipe or angle piece with your hand and press the

semi-automatic filter dedusting button 5x with the

device switched on.

Illustration L

Switching off the device

1. Press the semi-automatic filter dedusting button 5x.

2. Switch off the device at the turn switch.

3. Pull out the mains plug.

Each time after use

1. Empty the container.

2. Vacuum off the inside and outside of the device and

clean with a moist cloth.

Folding the push handle in/out

NT 50/1 only:

1. Release the push handle lock and adjust the push

handle.

Storing the device

1. Store the suction hose and mains cable as shown in

the illustration.

Illustration M

2. Store the device in a dry room and secure it against

unauthorised use.

Transport

몇CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during transporta-

tion.

1. Remove the suction hose with floor nozzle from the

support. Carry the device by the carrying handle and

the suction pipe, not by the push handle.

2. When transporting the device in vehicles, secure it

to prevent it from slipping or overturning in accord-

ance with the respective valid guidelines.

Storage

몇CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during storage.

The device may only be operated indoors.

Care and service

DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Remove the mains plug.

Dust extraction machines are safety devices for the pre-

vention or elimination of hazards according to the Ger-

man DGUV regulation 1 (German accident prevention

regulation, principles of prevention).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 40-1 Ap L Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info