Bedienungsanleitung Karcher NT 40-1 Tact Te H (Seite 17 von 204) (Alle Sprachen)

804522

Zoom out

Zoom in

Vorherige Seite

1/204

Nächste Seite

English 17

Installing the dust bag

1. Unlock and remove the suction head.

2. Insert the dust bag.

Illustration E

3. Pull the dust bag over the container. Ensure that the

marking line is within the container and the ventila-

tion hole is positioned on the back wall of the con-

tainer.

4. Fit and lock the suction head.

Wet vacuum cleaning

DANGER

Danger from dust that is harmful to your health

Respiratory sicknesses through inhalation of dust.

No dusts harmful to health may be vacuumed when per-

forming wet vacuum cleaning.

Installing the squeegees

1. Remove the brush strip.

Illustration F

2. Install the squeegees.

Closing the suction connection

1. Fit a plug exactly into the suction connection.

Illustration G

2. Push the plugs in until they engage.

Removing the safety filter bag

●The safety filter bag must always be removed when

vacuuming wet substances.

1. Unlock and remove the suction head.

2. Pull safety filter bag on the flange up and out.

Illustration H

3. Seal the suction connection opening of the safety fil-

ter bag tightly with a sealing cap.

4. Fold up the safety filter bag.

Illustration I

5. Take off the protective film and close the ventilation

hole (1x NT 30/1 - 2x NT 40/1, NT 50/1) with a self-

adhesive tab.

Illustration J

6. Close the safety filter bag tightly with the attached

cable tie.

7. Remove the safety filter bag.

8. Clean the container inside with a moist cloth.

9. Dispose of used safety filter bag in dust-tight bag in

accordance with statutory regulations.

10. Fit and lock the suction head.

Removing the dust bag

●The dust bag must always be removed when vacu-

uming wet substances.

1. Unlock and remove the suction head.

2. Fold up the dust bag.

Illustration K

3. Take off the protective film and close the ventilation

hole with a self-adhesive tab.

4. Seal the dust bag tightly underneath the opening us-

ing cable ties.

5. Remove the dust bag.

6. Clean the container inside with a moist cloth.

7. Dispose of the dust bag in accordance with statutory

regulations.

8. Fit and lock the suction head.

Draining the waste water

NT 50/1 only:

1. Drain the waste water via the drain hose.

Illustration L

General

●We recommend switching off the "Automatic filter

dedusting" function when vacuuming wet dirt with

the crevice nozzle or the upholstery nozzle (option-

al), or when sucking mainly water out of a container.

●The device switches off automatically when the

maximum fluid level is reached.

●When vacuuming non-conductive liquids (e.g. drill

emulsion, oils and grease) the device does not au-

tomatically switch off when the container is full. The

filling level must be continuously monitored and the

container emptied on a timely basis.

●On completion of wet vacuum cleaning: Clean the

flat fold filter using the dedusting function. Clean the

electrodes with a brush. Clean the container with a

moist cloth and dry it off.

Clip connection

The suction hose is equipped with a clip system. All ac-

cessory parts with a nominal width of 35 mm can be

connected.

Illustration M

Operation

Turn switch

Switching on the device

1. Connect the mains plug.

2. Set the turn switch to the desired program.

Working with power tools

DANGER

Danger of electric shock

Risk of injury and damage.

The socket is only intended for direct connection of pow-

er tools to the vacuum cleaner. Any other use of the

socket is prohibited.

1. Plug the mains plug of the power tool into the power

socket on the vacuum cleaner. The vacuum cleaner

is in Standby mode.

2. Switch on the device at the turn switch.

Note

The vacuum cleaner is automatically switched on and

off with the power tool.

Note

The vacuum cleaner has a startup delay of up to 0.5

seconds and an after-running time of up to 15 seconds.

Note

See the Technical data for the permissible power rating

of the power tool.

3. Remove the angle piece from the suction hose.

Illustration N

4. Install the tool adapter on the suction hose.

5. Connect the tool adapter to the power tool.

Illustration O

Device OFF

●Device ON

●Automatic filter dedusting: OFF

●Adjust the suction performance (min-

max)

●Device ON

●Automatic filter dedusting: ON

●Adjust the suction performance (min-

max) (eco = energy-saving mode)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 40-1 Tact Te H Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info