Bedienungsanleitung Karcher NT 50-1 Ap L (Seite 16 von 176) (Alle Sprachen)

804079

Zoom out

Zoom in

Vorherige Seite

1/176

Nächste Seite

16 English

ATTENTION

Care agents containing silicone

These can attach plastic components.

Do not use care agents containing silicone for cleaning.

●You can perform basic maintenance and care work

yourself.

●Clean the surface of the device and the interior of

the container regularly with a moist cloth.

Main filter element

Replacing the flat fold filter

1. Open the filter cover.

2. Remove the filter frame.

Illustration N

3. Remove the flat fold filter.

4. Dispose of the used flat fold filter in accordance with

statutory regulations.

5. Remove any dirt deposits from the clean air side.

6. Clean the filter frame and the supporting surface of

the filter frame with a damp cloth.

7. Fit the new flat fold filter. During insertion, ensure

that the flat fold filter is flush on all sides.

8. Insert the filter frame.

9. Close the filter cover until it audibly latches into

place.

Change the candle filter

1. Open the filter cover.

2. Take out the candle filter (special accessories).

Illustration O

3. Dispose of the used candle filter (special accesso-

ries) in accordance with statutory regulations.

4. Remove any dirt deposits from the clean air side.

5. Clean the candle filter frame with a damp cloth.

6. Insert the new candle filter (special accessories).

7. Close the filter cover until it audibly latches into

place.

Changing the fleece filter bag

1. Unlock and remove the suction head.

2. Pull the fleece filter bag on the flange up and out.

Illustration F

3. Seal the fleece filter bag with cap.

4. Dispose of the used fleece filter bag in accordance

with statutory regulations.

5. Fit the new fleece filter bag.

6. Fit and lock the suction head.

Changing the dust bag

1. Unlock and remove the suction head.

2. Fold up the dust bag (special accessories).

Illustration G

3. Close the dust bag (special accessory) tightly with a

cable tie underneath the opening.

4. Take out the dust bag (special accessories).

5. Clean the container inside with a moist cloth.

6. Dispose of the dust bag (special accessory) in ac-

cordance with statutory provisions.

7. Insert the new dust bag (special accessories).

8. Pull the dust bag (special accessories) over the con-

tainer. Ensure that the marking line is within the con-

tainer and both ventilation holes are positioned on

the back wall of the container.

9. Fit and lock the suction head.

Cleaning the electrodes

1. Unlock and remove the suction head.

2. Clean the electrodes with a brush.

3. Fit and lock the suction head.

Troubleshooting guide

DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Remove the mains plug.

Note

The device must be switched off immediately if a mal-

function occurs (e.g. filter breakage). The malfunction

must be eliminated before switching the device on

again.

Suction turbine does not start up

1. Check the socket and the power supply fuse.

2. Check the mains cable, mains plug, electrodes and

(if necessary) the power socket on the device.

3. Switch on the device.

Suction turbine switches off

1. Empty the container.

Suction turbine does not switch on again after emp-

tying the container

1. Switch off the device and wait for 5 seconds. Switch

on the device.

2. Clean the electrodes with a brush.

Suction power decreases

1. Remove any blockages from the suction nozzle,

suction pipe, suction hose or main filter element.

2. Change the filled fleece filter bag.

3. Change the filled dust bag (special accessories).

4. Press the semi-automatic filter dedusting button 5x

with the device switched on.

5. Correctly engage the filter cover.

6. Change the main filter element.

7. NT 50/1 only: Check the drain hose for leaks.

Escaping dust when vacuuming

1. Only with flat fold filters: Check that the flat fold filter

is correctly fitted and correct if necessary.

Illustration P

2. Change the main filter element.

The automatic switch-off mechanism (wet vacuum

cleaning) does not trigger

1. Clean the electrodes with a brush.

2. Continuously monitor the filling level when vacuum-

ing non-conductive liquids.

Semi-automatic filter dedusting not working

1. Suction hose not connected.

Semi-automatic filter dedusting does not switch off

1. Contact Customer Service.

Semi-automatic filter dedusting cannot be switched

1. Contact Customer Service.

Customer Service department

If the malfunction cannot be corrected, the device must

be checked by the Customer Service department.

Warranty

The warranty conditions issued by our sales company

responsible apply in all countries. We shall remedy pos-

sible malfunctions on your device within the warranty

period free of cost, provided that a material or manufac-

turing defect is the cause. In a warranty case, please

contact your dealer (with the purchase receipt) or the

next authorised customer service site.

(See overleaf for the address)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 50-1 Ap L Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info