Bedienungsanleitung Karcher NT 75-1 Tact Me Te H (Seite 15 von 168) (Alle Sprachen)

804520

Zoom out

Zoom in

Vorherige Seite

1/168

Nächste Seite

English 15

Closing the suction connection

1. Fit a plug exactly into the suction connection.

Illustration G

2. Push the plugs in until they engage.

3. Close the suction connection tightly with the plug by

turning it clockwise.

Note

The bayonet connection ensures a precise fit.

Removing the safety filter bag

●The safety filter bag must always be removed when

vacuuming wet substances.

1. Unlock and remove the suction head.

2. Fold up the safety filter bag.

Illustration H

3. Take off the protective film and close the ventilation

holes with a self-adhesive tab.

Illustration I

4. Pull the safety filter bag out towards the back.

5. Seal the suction connection opening of the safety fil-

ter bag tightly with a sealing cap.

Illustration J

6. Close the safety filter bag tightly with the attached

cable tie.

Illustration K

7. Remove the safety filter bag.

8. Clean the container inside with a moist cloth.

9. Dispose of used safety filter bag in dust-tight bag in

accordance with statutory regulations.

10. Fit and lock the suction head.

General

●We recommend switching off the "Automatic filter

dedusting" function when vacuuming wet dirt with

the crevice nozzle or the upholstery nozzle (option-

al), or when sucking mainly water out of a container.

●The device switches off automatically when the

maximum fluid level is reached.

●When vacuuming non-conductive liquids (e.g. drill

emulsion, oils and grease) the device does not au-

tomatically switch off when the container is full. The

filling level must be continuously monitored and the

container emptied on a timely basis.

●On completion of wet vacuum cleaning: Clean the

flat fold filter using the dedusting function. Clean the

electrodes with a brush. Clean the container with a

moist cloth and dry it off.

Clip connection

The suction hose is equipped with a clip system. All ac-

cessory parts with a nominal width of 35 mm can be

connected.

Illustration L

Operation

Turn switch

Switching on the device

1. Connect the mains plug.

2. Switch on the device at the turn switch.

Adjusting the suction power

1. Adjust the suction power (min-max) via the rotary

control.

Working with power tools

DANGER

Danger of electric shock

Risk of injury and damage.

The socket is only intended for direct connection of pow-

er tools to the vacuum cleaner. Any other use of the

socket is prohibited.

1. Plug the mains plug of the power tool into the power

socket on the vacuum cleaner.

2. Switch on the device at the turn switch. Control lamp

lights up, vacuum cleaner is in standby mode.

Note

The vacuum cleaner is automatically switched on and

off with the power tool.

Note

The vacuum cleaner has a startup delay of up to 0.5

seconds and an after-running time of up to 15 seconds.

Note

See the Technical data for the permissible power rating

of the power tool.

3. Adapt the tool adapter to the connection of the pow-

er tool.

Illustration M

4. Remove the angle piece from the suction hose.

Illustration N

5. Install the tool adapter on the suction hose.

6. Connect the tool adapter to the power tool.

Illustration O

7. Set the minimum volume flow on the turn switch for

suction hose cross section. The scale shows the

suction hose suction hose cross section.

Note

The different suction hose cross sections are necessary

in order to adapt to the different connection cross sec-

tions of the processing machines.

Note

For operation as a dust removal device for mobile oper-

ation (processing machine plugged into the vacuum

cleaner) the integrated monitoring system must be ad-

justed to suit the connected processing machine (dust

generator). This means that the user must be warned

when the flow rate drops below the minimum value 20

m/s needed for correct vacuuming.

Note

Information on the minimum flow rate depending on the

vacuum can be found on the type plate.

Automatic filter dedusting

The device is equipped with a special filter dedusting

function, which is particularly effective against fine dust.

The flat fold filter is automatically cleaned every 15 sec-

onds by a blast of air (pulsing noise).

Switching off the device

1. Switch off the device at the turn switch.

2. Pull out the mains plug.

Device ON

Automatic filter dedusting: OFF

Device OFF

Device ON

Automatic filter dedusting: ON

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 75-1 Tact Me Te H Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info