Bedienungsanleitung Karcher NT 80-1 (Seite 12 von 188) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478631

Zoom out

Zoom in

Vorherige Seite

1/188

Nächste Seite

- 5

gory 1 are not suited for use on work

machines.

– From a safety point of view, industrial

vacuum cleaners with protection

against dust explosions are not suitable

for sucking in hazardous substances

that are explosive by nature, fluids and

mixtures of combustible dust with fluids

according to Section 1 of the Explosives

Act.

– Please follow the safety regulations ap-

plicable to the materials to be sucked in.

During proper/ improper use, the parts

(such as exhaust opening) of the indus-

trial vacuum cleaner can tolerate a

maximum of 95 °C.

In case of emergency (while sucking in

combustible materials, when there is a

short-circuit or some other electrical de-

fect), switch off the appliance and remove

the plug from the socket.

Î Put the unit into its working position, se-

curing it with the parking brake if neces-

sary.

Î Insert the suction hose into the suction

hose connection and lock it in place by

turning it in a clockwise direction.

Î Attach the desired accessories and turn

them clockwise.

Note

Additional regulations can be applicable to

dusts with an ignition capacity below 1mJ.

Please note the following when switch-

ing from wet to dry vacuum cleaning:

Note

If you vacuum dry dust while the filter ele-

ment is still wet the filter will become ob-

structed and may be damaged beyond

repair.

Î Dry the wet filter properly before use or

replace it with a dry one.

– Suction of normal- rough dirt can be un-

dertaken without any problem with the

integrated cartridge filter.

– Change the filter, if required, according

to instructions under the section "Main-

tenance and Care".

Î Remove the filter bag for wet suction.

The cartridge filter must remain in-

stalled in the machine.

Î Completely empty the container after

finishing use.

A rough filter should be installed (Order No.

5.731-025.0) if liquid is to be sucked in con-

tinuously.

Note

If the container is full, a float closes the suc-

tion opening, and the suction turbine works

at a higher speed. Switch off the appliance

immediately, and empty the container.

Î Insert the appliance plug into the mains

socket. Do not use extension cables.

Î Switch on the appliance using the On/

Off switch (Position 1).

The machine is equipped with a suction

power monitor. The control lamp lights up if

the air speed in the suction hose falls below

20 m/s.

Î Switch off the vacuum unit, replace full

filter bag with an empty one.

Î Check suction hose and attachments

for blocks.

Î The cartridge filter must also be re-

placed if the machine is used for long

periods.

Note

In Emergency

Start up

Dry vacuum cleaning

Wet vacuum cleaning

Operation

Turning on the Appliance

Automatic monitoring of suction ca-

pacity

12 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher NT 80-1 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info