Bedienungsanleitung Karcher OC 3 (Seite 15 von 174) (Alle Sprachen)

724915

Zoom out

Zoom in

Vorherige Seite

1/174

Nächste Seite

(QJOLVK 

Operation with conical jet nozzle

The conical jet nozzle is suitable for gentle cleaning of

fur and paws or particularly sensitive components.

몇CAUTION

Spray jet

Eye injuries and hearing damage

Do not direct the spray jet at eyes or ears.

1. Fit the conical jet nozzle.

Illustration L

Operation with detergent

DANGER

Failure to adhere to the safety data sheet

Incorrect handling of the detergent can seriously dam-

age your health

Observe the safety data sheet of the detergent manu-

facturer, in particular the instructions on personal pro-

tective equipment.

ATTENTION

Improper water supply

Damage to the device

Do not fill the water reservoir with any detergents, pes-

ticides or other additives.

Recommended cleaning method

1. Spray the detergent sparingly on the dry surface and

let it work for a while (do not let it dry).

2. Rinse off the loosened dirt with the low pressure

stream.

Operation with universal brush

ATTENTION

Damage to surfaces through a dirty universal brush

Paint damage

Ensure that the universal brush is free from dirt or other

particles before using it.

1. Fit the universal brush.

Illustration M

Interrupting operation

1. Release the lever of the trigger gun.

After another 5 minutes without being pressed, the de-

vice shuts off automatically.

Ending operation

1. Remove the reservoir or suction hose.

2. Switch the device on.

3. Actuate the lever of the trigger gun until no more wa-

ter is emitted.

4. Release the lever of the trigger gun.

5. Completely empty the reservoir.

6. If necessary, reinsert the fine filter and valve opener.

Ensure that the pin of the valve opener points up-

wards.

Transport

몇CAUTION

Risk of injury and damage

Be aware of the weight of the device during transporta-

tion.

1. Observe regulations for dangerous goods during

transport.

Manual transport

1. Lift and carry the device by the carrying handle.

Transport in vehicles

1. Secure the device against slipping and tipping over.

Storage

몇CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during storage.

Storing the device

1. Place the device on a level surface.

2. Store the device within the permissible temperature

range (see Chapter Technical data).

Frost protection

ATTENTION

Danger of frost

Incompletely emptied devices can be destroyed by

frost.

Completely empty the device and accessories.

Protect the device from frost.

1. Drain the device (see Chapter Ending operation).

Care and service

DANGER

Touching live parts

Danger of injury from electric shock

Switch off the device and unplug the charger from the

device before performing any work on the device.

Cleaning the valve opener/fine filter

Clean the valve opener and fine filter regularly.

ATTENTION

Material damage due to incorrect cleaning

Take care not to damage the valve opener and filter.

1. Pull the water reservoir vertically upwards.

2. Remove the valve opener using the suction hose

connection or a suitable pair of pliers.

Illustration G

3. Plug the suction hose connection onto the fine filter.

Illustration H

4. Remove the fine filter using the suction hose con-

nection or a suitable pair of pliers.

Illustration I

5. Clean the valve opener and fine filter under running

water.

6. Fit the fine filter and valve opener. Ensure that the

pin of the valve opener points upwards.

Troubleshooting guide

DANGER

Touching live parts

Danger of injury from electric shock

Switch off the device and unplug the charger from the

device before performing any work on the device.

Have repair work and work on electrical components

carried out by the authorised customer service only.

Malfunctions often have simple causes that you can

remedy yourself using the following overview. When in

doubt, or in the case of malfunctions not mentioned

here, please contact your authorised Customer Service.

Device not running

The charging state of the battery is too low.

1. Check the charging state of the battery and charge

it if necessary.

Motor overloaded; the motor circuit breaker has tripped.

1. Switch off the device.

2. Switch the device on and resume operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher OC 3 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info