Bedienungsanleitung Karcher PGG 3-1 (Seite 8 von 112) (Alle Sprachen)

804772

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

8 English

몇CAUTION

●Danger of burns

●Do not touch any hot parts

such as the muffler, cylinder or

cooling fins.

Danger of hearing damage

●Do not operate the device

without a muffler. Check the

muffler regularly and have a

damaged muffler replaced.

ATTENTION

●Risk of damage

●Use only spare parts from the

original manufacturer.

●Old fuel can lead to deposits

in the carburettor and impair

the engine performance. Use

only new fuel.

●Do not adjust any control

springs or linkages that might

increase the speed of the en-

gine.

●Do not operate the device with

the air filter removed.

●Do not pull the starter cord

while the device is running.

●Ensure adequate ventilation

so that the device does not

overheat.

Symbols on the device

몇WARNING

Danger of explosion, risk of fire.

Petrol can cause fires or explosions if handled incorrect-

ly.

Shut the motor down prior to refuelling.

Do not operate the device in confined spaces or partially

enclosed areas.

Read these operating instructions before using the de-

vice.

ATTENTION

Risk of damage

Do not refuel with diesel fuel.

Note:

Check the oil level before starting the device. The en-

gine stops and the indicator lamp lights up if the oil level

is too low. Refill oil (for oil type see "Technical data").

몇WARNING

Danger of explosion, risk of fire.

Shut the motor down prior to refuelling.

Clean up any spilt fuel before starting the device.

Do not start the device if the fuel system is leaky.

몇CAUTION

Hot surface

The exhaust pipe of the device be-

comes very hot during operation and

can cause burns.

Avoid touching the exhaust pipe.

몇WARNING

Risk of eye injuries and hearing dam-

age.

Wear safety goggles and hearing pro-

tection when operating the device.

Warning symbols

Observe the following warnings when handling the bat-

teries:

Device description

See cover page for pictures

Illustration A

1Air filter

2Push handle

3Starter cord

4Choke lever

5Fuel cock

6Fuel tank

7Control panel

8Battery

9Oil dipstick

10 Oil drain plug

11 Fuel tank filling level display

12 Fuel tank cap

13 Type plate

14 Indicator lamp

15 Engine key-operated switch

16 DC circuit breaker

17 DC terminals

18 AC voltmeter

19 Power circuit breaker

20 AC power socket

21 PGG 6/1: AC power socket

PGG 8/3: Three-phase socket

22 Earthing terminal

Symbols on the device

Clean the air filter every 50 operating hours or every 10

operating hours in the case of dusty environments(see

"Care and maintenance/Cleaning the air filter").

Note on checking the oil level.

Choke lever

Installation

1. Mount the push handle on the device frame using

the mounting materials provided.

Illustration B

1Push handle

2Stands

3Wheel

2. Mount the wheels on the device frame using the

mounting materials provided.

3. Mount the stands on the device frame using the

mounting materials provided.

Initial start-up

Fill with oil

1. Position the device on a level surface.

2. Unscrew the oil dipstick.

3. Fill with engine oil.

Note: The engine oil is not included in the scope of

delivery. The filling quantity and oil type are speci-

fied in the section "Technical data".

4. Wipe off the oil dipstick.

5. Insert the oil dipstick as far as it will go, but do not

screw in.

6. Pull out the oil dipstick. The oil level must lie in the

marked section of the oil dipstick.

7. Top up the engine oil if the level is too low.

8. Screw in and tighten the oil dipstick.

Initial startup

Check the oil level

1. Position the device on a level surface.

2. Unscrew the oil dipstick.

3. Wipe off the oil dipstick.

4. Insert the oil dipstick as far as it will go, but do not

screw in.

5. Pull out the oil dipstick. The oil level must lie in the

marked section of the oil dipstick.

6. Top up the engine oil if the level is too low.

7. Screw in and tighten the oil dipstick.

Refuelling

1. Read the fuel level indicator.

2. Refill the fuel tank with the tank indicator shows a

low filling level.

3. Unscrew the fuel tank cap.

4. Fill fuel up a maximum of the lower edge of the filling

nozzle.

5. Fit the fuel tank cap and screw tight.

Operation

Starting the device

1. Open the fuel cock.

2. Push the choke lever to the left if the engine is cold.

3. Turn the key-operated switch to the START position

and hold in this position until the engine starts. Hold

the key-operated switch in the START position for

no longer than 5 seconds. Wait for at least

10 seconds before attempting to start again.

4. Allow the key-operated switch to return to the 1/ON

position when the engine has started.

5. Push the choke lever to the right once the engine

has started.

Starting with the pull cord starter

1. Open the fuel cock.

2. Push the choke lever to the left if the engine is cold.

3. Pull the starter cord slowly until a strong resistance

is discernible then pull strongly.

4. Slowly return the starter cord.

ATTENTION

Risk of damage

A rapidly returning starter cord damages the device.

Observe notes in the instructions for the

battery, on the battery and in these oper-

ating instructions.

Wear eye protection.

Keep acids and batteries away from chil-

dren.

Risk of explosion

Fire, sparks, open flames and smoking

are prohibited.

Risk of acid burns

First aid.

Warning

Disposal

Do not throw batteries in the bin.

Karcher PGG 3-1 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info