Bedienungsanleitung Karcher PSU 4-18 (Seite 11 von 140) (Alle Sprachen)

803782

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

English 11

bles better control of the power tool in unexpect-

ed situations.

fWear suitable clothing. Do not wear loose-fit-

ting clothing or dangling jewellery. Keep your

hair, clothing and gloves away from moving

parts. Loose clothes, gloves, jewellery or long

hair can be caught in moving parts.

4Power tool use and care

aDo not overload the device. Use the correct

power tool for your application. The correct

power tool will do the job better and safer at the

rate for which it was designed.

bDo not use the power tool if the switch does

not turn it on and off. Any power tool that cannot

be controlled with the switch is dangerous and

must be repaired.

cDisconnect the plug from the power source

and/or the battery pack before making any ad-

justments, changing accessories, or storing

the device. Such preventive safety measures re-

duce the risk of starting the power tool accidental-

ly.

dStore unused power tools out of the reach of

children. Do not allow persons unfamiliar with

the device or these instructions to operate the

device. Power tools are dangerous in the hands

of untrained users.

eMaintain power tools. Check for misalignment

or binding of moving parts, breakage of parts

and any other condition that may affect the

power tool’s operation. If damaged, have the

power tool repaired before use. Many acci-

dents are caused by poorly maintained power

tools.

fUse the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the pow-

er tool for operations different from those intend-

ed could result in a hazardous situation.

5Use and care of battery packs

aOnly charge the battery pack with the charg-

ers approved by the manufacturer. Chargers

that are not suitable for the corresponding battery

pack may cause a fire.

bOnly use the device with a suitable battery

pack. Using a different battery pack may cause

injury or fire.

cWhen not in use, keep the battery pack away

from metallic objects such as paper clips,

coins, keys, nails, screws or other small me-

tallic objects that may cause a short-circuit. A

short circuit can cause a fire or explosion.

dUnder certain circumstances, fluid may es-

cape from the battery pack. Avoid contact. If

you come into contact with the fluid, rinse the

corresponding skin thoroughly with water. If

you get the fluid in your eye, seek medical at-

tention immediately. Battery fluid can cause

rashes and burns on the skin.

6Service

aHave your power tool serviced by a qualified

repair person using only identical replace-

ment parts. This will ensure that the safety of the

power tool is maintained.

Description of the device

Illustration A

1Battery pack mounting

2Power switch

3Lockable spray trigger

4Spray lance

5Spray nozzle

6Filling nozzle with measuring cup

7Hose connection

8Hose

9Shoulder strap support

10 Tank

11 Lock latch

12 *Battery Pack Battery Power 18V

13 *Quick Charger Battery Power 18V

14 Shoulder strap

* Not included in the scope of delivery.

Installation

Mounting the spray lance and hose

1. Connect the spray lance to the handle and screw it

tight.

2. Turn the spray lance until it is aligned with the han-

dle pointing downwards.

Illustration B

3. Push the nut of the hose on to the device and tighten

it.

Illustration C

Note

Check the tight fit of the spray lance.

Note

When putting on the housing, make sure that the short

hose on the device is inserted into the hole on the tank.

Initial startup

Filling the tank

1. Unscrew the measuring cup.

2. Fill the tank with the desired amount of water (up to

4 litres).

3. Using the measuring cup, measure the desired

amount of fluid/additive (up to 120 ml) and carefully

pour it into the tank.

Illustration G

4. Rinse the measuring cup with clear water and screw

it back on.

Note

Hold the device horizontally with the tank completely

filled to prevent any leakage through the intake opening.

Clipping in the shoulder strap

1. Clip the shoulder strap into the clips on the housing.

Note

Make sure that the shoulder strap is clipped in correctly.

Installing the battery pack

1. Push the battery pack into the receptacle in the de-

vice until it audibly locks in place.

Illustration J

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher PSU 4-18 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info