Bedienungsanleitung Karcher PW 30-1 (Seite 8 von 88) (Alle Sprachen)

804557

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

8English

Using the additional socket

1. Open the protective cover of the additional socket.

2. Plug the unit plug of the PW 30/1 into the additional

socket of the Puzzi washing vacuum.

3. Put PW 30/1 into operation.

Operation

Switching on the device

1. Put the Puzzi washing vacuum into operation.

2. Start the brush drive on the power switch of the PW

30/1.

Illustration E

Note

When the brush is blocked, the brush drive switches off.

For remedy see troubleshooting guide.

Cleaning

1. Operate the valve handle. This is used to spray on

the detergent solution. The waste water is immedi-

ately vacuumed back in via the suction nozzle.

Illustration F

2. For cleaning, pull PW 30/1 backwards over the car-

pet in slightly overlapping paths. Start in such a way

that areas that have already been cleaned do not

have to be walked on again.

3. Release the valve handle when moving forward (idle

stroke).

Switching off the device

1. Switch off the brush drive at the power switch.

2. Set the Puzzi washing vacuum out of operation.

Transport

몇CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during transporta-

tion.

1. Pull the device behind you with the suction pipe

when transporting it over longer distances.

2. Carry the device by the casing and suction pipe.

3. When transporting the device in vehicles, secure it

to prevent it from slipping or overturning in accord-

ance with the respective valid guidelines.

Storage

몇CAUTION

Failure to observe the weight

Risk of injury and damage

Be aware of the weight of the device during storage.

The device may only be operated indoors.

Care and maintenance

DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Unplug the unit.

Maintenance intervals

Each time after use

1. Rinse PW 30/1 with clear water.

2. Clean the roller brush of lint and dirt.

3. Check the spray pattern of the nozzle mouthpiece; if

the spray pattern is uneven, clean the nozzle and

mouthpiece.

4. Clean the suction hose and suction nozzles when

the suction performance decreases.

Half-yearly

1. Check toothed belt wear and tension, replace

toothed belt if necessary.

2. Check brush wear, replace brush if necessary.

Maintenance work

Replacing the roller brush

1. Release 5 screws and remove the cover.

2. Remove the toothed belt.

3. Unscrew the screw on the front of the brush.

4. Dismantle the retaining plate on the opposite side by

loosening 3 screws and remove the brush.

5. Installation of the brush is performed in the reverse

sequence.

Troubleshooting guide

DANGER

Danger of electric shock

Injuries due to touching live parts

Switch off the device.

Unplug the unit.

Brush is blocked

Note

When the brush is blocked, the brush motor is switched

off.

1. Check brush for dirt and remove any blocking ob-

jects if necessary.

2. Unscrew the protective cover and press the fuse

switch using a screwdriver. Screw the protective

cover back in.

Customer Service department

If the malfunction cannot be corrected, the device must

be checked by the Customer Service department.

Warranty

The warranty conditions issued by our relevant sales

company apply in all countries. We shall remedy possi-

ble malfunctions on your appliance within the warranty

period free of cost, provided that a material or manufac-

turing defect is the cause. In a warranty case, please

contact your dealer (with the purchase receipt) or the

next authorised customer service site.

(See overleaf for the address)

Accessories and spare parts

Only use original accessories and original spare parts.

They ensure that the appliance will run fault-free and

safely.

Information on accessories and spare parts can be

found at www.kaercher.com.

Declaration of Conformity

We hereby declare that the machine described below

complies with the relevant basic safety and health re-

quirements in the EU Directives, both in its basic design

and construction as well as in the version placed in cir-

culation by us. This declaration is invalidated by any

changes made to the machine that are not approved by

us.

Product: Spray extraction device

Type: 1.913-xxx

EU Declaration of Conformity

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher PW 30-1 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info