Bedienungsanleitung Karcher SC 2 EasyFix Premium (Seite 11 von 138) (Alle Sprachen)

724880

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

English 11

b Push the second extension tube onto the

first extension tube.

The connection pipes are connected.

Illustration J

5. Push the accessory and / or the floor nozzle onto the

free end of the extension tube.

Illustration K

The accessory is connected.

Disconnecting accessories

1. Set the selector switch for the steam volume to the rear.

The steam lever is locked.

2. Push the unlocking button and pull the parts apart.

Illustration M

Operation

Filling water

Note

Warm water reduces the heating-up time.

Note

Descaling the steam boiler is not required if commer-

cially available distilled water is used.

1. Unscrew the safety lock.

Illustration C

2. Drain the water completely out of the steam boiler.

Illustration Q

3. Fill a maximum of 1 l distilled water or tap water into

the steam boiler.

Illustration C

4. Insert the safety lock.

Illustration D

Switch on the device

1. Place the device on a firm surface.

2. Insert the mains plug into a socket.

Illustration E

The green and orange indicator lights illuminate.

3. Wait until the orange indicator light - heating goes out.

Illustration F

4. Press the steam lever.

Illustration G

Steam leaks out.

Regulating the steam volume

Note

The device heating always switches on again during

use to maintain the pressure in the steam boiler. The or-

ange indicator light - heating illuminates to indicate this.

The expelled steam volume is regulated using the se-

lector switch for steam volume. The selector switch has

3 positions:

1. Set the selector switch for the steam volume to re-

quired steam volume.

2. Press the steam lever.

3. Before starting cleaning, point the steam gun at a

cloth until steam is expelled evenly.

Topping up the water

If the steam volume is reduced during work or if no more

steam volume comes out, the water will have to be re-

filled.

1. Switch the appliance off, see Chapter Switch off the

appliance.

2. Unscrew the safety lock.

3. Fill a maximum of 1 l distilled water or tap water into

the steam boiler.

4. Insert the safety lock.

5. Insert the mains plug into a socket.

6. Wait until the orange indicator light - heating goes out.

The appliance is ready for use.

Switch off the appliance

1. Pull the mains plug out of the socket.

2. Press the steam lever until no more steam flows out.

Illustration N

The steam boiler is depressurised.

3. Set the child lock (selector switch for steam volume)

to the rear.

The steam lever is locked.

Rinsing out the steam boiler

Rinse the appliance’s steam boiler after max. every

tenth boiler fill.

1. Switch the appliance off, see Chapter Switch off the

appliance.

2. Allow the appliance to cool down.

3. Disconnect the accessory.

4. Fill the steam boiler with water and swing it around

vigorously. Lime residue which has been deposited

on the bottom of the steam boiler will be released as

a result.

5. Drain the water completely out of the steam boiler.

Illustration Q

Storing the device

1. Connect the extension tubes to the large mounts for

accessories.

2. Connect a manual nozzle and spotlight nozzle to

each extension tube.

3. Fasten the large round brush to the spotlight nozzle.

4. Connect the small round brush and nozzles to the

medium-sized mount for accessories.

5. Hang the floor nozzle in the park bracket.

Illustration O

6. Wind the steam hose around the extension tube and

connect the steam gun to the floor nozzle.

Illustration P

7. Wind the mains cable around the extension tube.

8. Store the device in a dry location that is protected

from frost.

Important application instructions

Cleaning the floor areas

We recommend sweeping the floor or vacuum cleaning

it before using the appliance. In this way the floor will be

cleared of dirt and loose particles before the wet clean-

ing.

Freshening up textiles

Prior to using the appliance, always check the compati-

bility of the textiles at a concealed point: Steam down

the textile, allow it to dry and then check it for any

change in colour or shape.

Maximum steam volume

Reduced steam volume

No steam - child lock

Note

In this position, the steam lever cannot

be operated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 2 EasyFix Premium Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info