Bedienungsanleitung Karcher SC 2 Upright EasyFix (Seite 12 von 160) (Alle Sprachen)

803425

Zoom out

Zoom in

Vorherige Seite

1/160

Nächste Seite

12 English

Note

The decalcification cartridge must be installed in the wa-

ter reservoir when filling the water reservoir.

Filling the water reservoir directly on the device

1. Hold the device firmly.

2. Open the reservoir cover, and fill the water reservoir

with max. 0.4 l tap water, directly at the device.

Illustration F

3. Close the reservoir cover.

Removing the water reservoir for filling

1. Hold the device firmly.

2. Pull the water reservoir vertically upwards by the

handle.

3. Open the reservoir cover, and fill with max. 0.4 l tap

water.

Illustration G

4. Close the reservoir cover.

5. Insert the water reservoir and press downwards until

it locks into place.

Switching on the device

ATTENTION

Device and material damage due to tipping over

The device can fall over and be damaged if inadequate-

ly secured during work breaks or storage. Liquid can al-

so leak out and damage the floor covering in the

process.

Position the device with the floor nozzle on a solid base,

or the handle with the wall anti-slip protection in a verti-

cal position on a solid wall.

Installation information

When steaming for the first time after removing and re-

inserting the decalcification cartridge, the steam jet may

be weak or irregular, and individual drops of water may

be expelled. The device requires a short running-in pe-

riod in which the decalcification cartridge fills with water.

The steam volume that is expelled increases constantly

until the maximum steam volume has been reached af-

ter approx. 50 seconds.

Note

Please note that here it is set to steam stage 2 (tiles/

stone), since the running-in period will otherwise be ex-

tended.

1. Place the device on a firm surface.

Illustration H

2. Plug the mains plug into a mains socket.

Illustration I

3. The indicator light flashes red alternately.

Illustration J

4. The indicator light lights up constantly green after

approx. 30 seconds.

Illustration K

The device is ready for use.

Regulating the steam volume

The steam volume setting depends on the surface to be

cleaned.

Note

Controlling the volume of steam only works for the SC 2

Upright EasyFix. Only one steam stage is available for

the KST 2 Upright.

Press the button with the direction arrows on the

handle repeatedly until the desired steam stage is

selected.

Illustration L

2 different steam stages are available:

Note

The maximum steam stage (Tiles/stone) is always se-

lected when the device is switched on.

●Press the steam lever after setting the steam vol-

ume.

Illustration M

Refilling water

Note

The water level can be seen through the partially trans-

parent fresh water reservoir.

When the water is refilled, the decalcification cartridge

remains fixed in the device.

Open the reservoir cover, and fill the water reservoir

with max. 0.4 l tap water, directly at the device.

Illustration F

Remove the water reservoir, open the reservoir cov-

er, and fill with max. 0.4 l tap water, see chapter Fill-

ing water.

Illustration G

Interrupting operation

ATTENTION

Material damage due to condensate/moisture

The floor covering can be damaged by moisture remain-

ing on the floor cleaning cloth or floor nozzle/device af-

ter cleaning.

Remove the floor cleaning cloth and dry the floor nozzle/

the device after finishing the cleaning work.

Do not place or store the device on heat-sensitive sur-

faces.

In order to save energy, we recommend that you switch

off the device for breaks in operation of longer than 20

minutes.

1. Pull the mains plug out of the socket.

Illustration N

Switching off the device

1. Pull the mains plug out of the socket.

Illustration N

ATTENTION

Device damage due to water putrefaction

The water in the reservoir may putrefy if the device is

not put into operation for more than 2 months.

Drain the water reservoir before longer breaks in oper-

ation.

2. To drain the water reservoir, see chapter Draining

the water reservoir.

Illustration O

Storing the device

1. To remove the floor cleaning cloth, see chapter

Floor nozzle.

Illustration C

2. Remove the moisture from the floor nozzle/device.

3. Wind the power cable around the lower and upper

cable hooks.

Illustration P

Tiles/stone - maximum steam stage

Wood - minimum steam stage

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 2 Upright EasyFix Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info