Bedienungsanleitung Karcher SC 2 (Seite 13 von 138) (Alle Sprachen)

657215

Zoom out

Zoom in

Vorherige Seite

1/138

Nächste Seite

– 8

Rinse the steam cleaner boiler at the latest after 10 boil-

er fillings.

 Fill the boiler with water and swing it strongly. This

dissolves lime scaling residing on the boiler bottom.

 Empty water out.

Note

In case of continuous use of commercially available dis-

tilled water, no descaling of the boiler is necessary.

As limescale builds up on the boiler walls, we recom-

mend to descale the boiler in the following intervals

(RF=reservoir fillings):

Note

The hardness of the tap water can be inquired at your

water management office or the municipal utilities.

 Disconnect the mains plug from the socket.

 Allow device to cool down.

 Remove the safety lock from the device.

Illustration

 Completely empty the steam boiler to remove exist-

ing water.

 Use KÄRCHER descaler sticks for descaling.

Please follow the dosing instructions on the pack-

aging when preparing the descaler.

 Pour the descaling solution into the boiler and allow

it to react for approximately 8 hours.

 Completely empty the descaling solution after 8

hours. A small amount of the solution will remain in

the boiler. Therefore, you should rinse the boiler

two to three times with cold water to remove any

residues of the descaler.

Illustration

 Completely empty the steam boiler to remove exist-

ing water.

Note

The floor cleaning cloth and the cloth cover have been

pre-washed and can be used immediately for working

with the steam cleaner.

 You can wash dirty floorcloths and cloth covers in

the washing machine at 60°C. Do not use a liquid

softener as this would affect the ability of the cloths

to pick up dirt. You may tumble dry the terry cloths.

The microfiber cloths are not suitable for the tum-

ble.

Often, failures have simple causes and you can do the

troubleshooting yourself using the following overview. If

you are in doubt or if the failure is not listed here please

contact the authorized customer service.

 Descale the steam boiler.

 Turn off the appliance.

 Refill water.

Steam switch is secured with the lock / child-proof lock.

 Move the selector switch for the steam volume to

the front.

 Press the steam gun until less water is emitted.

 Descale the steam boiler.

Subject to technical modifications!

Care and maintenance

Rinsing the boiler

Descaling the boiler

Degree of hardness ° dH mmol/l RF

I soft 0- 7 0-1,3 55

II medium 7-14 1,3-2,5 45

III hard 14-21 2,5-3,8 35

IV very hard >21 >3,8 25

Care of the Accessories

Troubleshooting

Long heating-up time

Steam boiler is decalcified

No steam

No water in the steam boiler.

Steam lever cannot be pressed anymore

High water output

Steam chamber too full

Steam boiler is decalcified

Technical specifications

Power connection

Voltage 220-240

1~50-60

Protective class I

Protection class IPX4

Performance data

Heating output 1500 W

Operating pressure max. 0,32 MPa

Heating time 6,5 Minutes

Steam volume

Continuous steaming 40 g/min

Steam push max. 100 g/min

Dimensions

Boiler capacity 1,0 l

Weight (without accessories) 3,1 kg

Width 254 mm

Length 380 mm

Height 260 mm

13EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 2 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info