Bedienungsanleitung Karcher SC 3 Premium (Seite 12 von 186) (Alle Sprachen)

657213

Zoom out

Zoom in

Vorherige Seite

1/186

Nächste Seite

– 6

 Illustrations on Page 2

Illustration

 Insert the descaler cartridge into the opening and

push it until it is tightly fitted.

Illustration

 Fill the water tank with a maximum of 1 litre of fresh

tap water.

Illustration

 Plug in the mains plug.

 Press the ON switch to turn on the appliance.

Illustration

 Indicator lamp glows green.

The device is ready for use after approx. 30 sec-

onds.

Illustration

 Set water hardness prior to first use.

ATTENTION

In order to guarantee the optimum functionality of the

descaler cartridge, the device must be set to the local

water hardness prior to the first operation.

Further information concerning the device setting can

be found in Chapter "Effect descaler cartridge and set-

ting of water hardness".

Illustration

 Connect the accessories to the steam gun.

 Operate steam lever.

ATTENTION

Only work with a cartridge inserted.

 As soon as the device is filled with water and is tak-

en into operation, the descaling effect of the car-

tridge is activated.

 Lime that is contained in the water is absorbed by

the granules in the cartridge. This prevents the cal-

cification of the device. An additional device desca-

ling is thus not required.

Note

The granules in the cartridge can change their colour af-

ter contact with water; this is related to the mineral con-

tent in the water. This discolouration is harmless and

does not have any negative effects on the device, clean-

ing work or the functionality of the cartridge.

Note

The hardness of the tap water can be inquired at your

water management office or the municipal utilities.

ATTENTION

In order to guarantee the optimum functionality of the

descaler cartridge, the device must be set to the local

water hardness prior to the first operation.

This is done via the RESET button.

Notes

 The device is set to the highest water hardness lev-

el (level IV) by default.

 After completion of the water hardness setting, it

remains saved until a new setting (e.g. after reloca-

tion) is necessary.

 During the setting no pause of more than 15 sec-

onds may take place. Otherwise the device is auto-

matically set to the water hardness selected last or

the highest water hardness with initial start-up.

Please observe the following procedure:

 Connect the mains cable to the power supply sys-

tem.

 The device must be switched off prior to the setting.

 Push the RESET button and hold it down during the

start-up of the device.

 After 2 seconds the indicator light is blinking and

signals the current setting of the water hardness via

the number of impulses.

 By repeatedly pressing the RESET button, the set-

ting of the water hardness level changes.

 As long as the RESET button is pressed, the flash-

ing impulse for the relevant water hardness level is

not shown.

 As soon as the button is released, the flashing im-

pulse appears for the output of the selected water

hardness.

 If the water hardness is set to the desired level,

hold down the RESET button for 3 seconds so that

the setting is saved.

 The saving process is displayed by the lighting up

of the indicator light for the water hardness.

ATTENTION

If the device is used in another area with a different wa-

ter hardness (e.g. after relocation), the water hardness

must be reset.

E1 Extension tubes (two tubes)

E2 Unlocking button

F1 Floor nozzle

F2 Retaining clip

F3 Terry floor cloth

F4 Microfibre floor cloth

Quick Reference

Effect descaler and adjustment of water

hardness

Effect descaler cartridge

Water hardness levels and flashing impulses

Degree of hard-

ness

° dH mmol/l Number

of flashing

impulses

Interval of

flashing

impulses

I soft 0- 7 0-1,3 1x

4 seconds

II medium 7-14 1,3-2,5 2x

III hard 14-21 2,5-3,8 3x

IV very hard >21 >3,8 4x

Setting of the water hardness

12 EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 3 Premium Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info