Bedienungsanleitung Karcher SC 3.000 (Seite 19 von 238) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

657231

Zoom out

Zoom in

Vorherige Seite

1/238

Nächste Seite

– 11

Application:

– Windows, mirrors

– Glass surfaces on showers

– other smooth surfaces

 Perform a fat dissolving basic cleaning

using the hand nozzle and a terry cloth

cover before using the window wiper.

 Apply steam to the glass surface from a

distance of approximately 20 cm until

the surface is moistened evenly.

 Strip the glass surface in straight lines

from the top to the bottom using the rub-

ber lip of the window wiper. Wipe the

rubber lip and the bottom edge of the

window dry after each strip.

ƽ Danger

Always disconnect the mains plug and al-

low the steam cleaner to cool down before

performing any maintenance work.

Rinse the steam cleaner boiler at the latest

after 5 boiler fillings.

 Fill the boiler with water and shake it

strongly. This dissolves lime scaling re-

siding on the boiler bottom.

 Empty water out.

Note: If you always use usual commercial

distilled water it is not necessary to descale

the boiler.

As limescale builds up on the boiler walls,

we recommend to descale the boiler in the

following intervals (RF=reservoir fillings):

Note: Please contact your Conservancy

Board or the local water supply company to

inquire about the hardness of your water.

 Disconnect the mains plug from the

socket.

 Allow device to cool down.

 Remove the safety cap from the device.

 Completely empty the steam boiler to

remove existing water (see fig. ).

ṇ Warning

Only use products approved by KÄRCHER

to exclude any damages of the appliance.

 User the KÄRCHER decalcifier sticks

(order no. 6.295-047) to decalcify the

water. Please follow the dosing instruc-

tions on the packaging while using the

decalcifying solution.

Caution

Use caution when filling and emptying the

steam cleaner. The descaling solution can

have an aggressive effect on delicate sur-

faces.

 Pour the descaling solution into the boil-

er and allow it to react for approximately

8 hours.

ṇ Warning

Do not screw the safety lock on the appli-

ance during the decalcifying.

Do not use the steam cleaner as long as

there is decalcifying agent in the boiler.

 Completely empty the descaling solu-

tion after 8 hours. A small amount of the

solution will remain in the boiler. There-

fore, you should rinse the boiler two to

three times with cold water to remove

any residues of the descaler.

 Completely empty the steam boiler to

remove existing water (see fig. ).

Window wiper

Maintenance and care

Rinsing the boiler

Descaling the boiler

Degree of hardness ° dH mmol/l RF

I soft 0- 7 0-1,3 55

II medium 7-14 1,3-2,5 45

III hard 14-21 2,5-3,8 35

IV very hard >21 >3,8 25

19EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SC 3.000 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info