Bedienungsanleitung Karcher SP 16.000 Dual (Seite 11 von 164) (Alle Sprachen)

803802

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

English 11

1 Screw the G 1 ½ pump connecting piece onto the

connection nozzle.

Illustration B

2 Push the hose clamp onto the hose.

3 Push the hose onto the G 1 ½ pump connecting

piece and fasten it with a hose clamp.

4 Push the connection nozzle into the Quick-Connect.

Illustration C

Connecting a hose to the pump when using a ¾″ or

1″ hose:

1 Screw the G 1 threaded connection onto the con-

nection nozzle.

Illustration B

2 Fit the special accessory G 1 pump connecting

piece(6.997-359.0 pump connecting piece G 1

(33.3 mm) incl. check valve - not included in the

scope of delivery) onto the G 1 threaded connec-

tion:

a Place the check valve on the G 1 threaded con-

nection so that the lettering "UP" is legible.

b Screw the pump connecting piece G 1 onto the

G 1 threaded connection.

3 Push the hose clamp onto the hose.

4 Push the hose onto the pump connecting piece G 1

and fasten it with a hose clamp.

5 Push the connection nozzle into the Quick-Connect.

Illustration C

Erecting/immersing the pump:

1 Insert the height adjustment of the float switch into

the lock.

Illustration D

2 Place the pump securely on solid ground in the

pumped liquid or immerse it via a rope attached to

the carrying handle.

Note

The suction area must not be blocked by soiling. If the

ground is muddy, place the pump on a brick or similar.

Make sure that the pump stands level. Do not carry the

pump using the cable or hose.

Operation

DANGER

Danger of death from electric shock.

Danger of death from electric shock if live parts are

touched.

During operation, do not touch the rope attached to the

carrying handle or any objects that are in contact with

the pumped liquid (e.g. pipelines protruding into the

pumped liquid, railings) and do not reach into the

pumped liquid.

Automatic venting device

1. If the fluid level is low, any sucked-in air, or air pres-

ent in the pump, may escape via the automatic vent-

ing device. Liquid can also leak along with air.

If the pump has problems priming when the fluid lev-

el is low, unplug and plug in the mains plug repeat-

edly to assist the priming process.

Illustration E

Adjusting the filter basket

The filter basket can be operated in 2 positions.

Illustration F

1. Put the pump on the ground.

2. Clamp the pump between your feet and take hold of

the carrying handle.

3. Unlatch the filter basket by turning the handle to the

right.

4. Move the filter basket into the required position.

5. Lock the filter basket in place by turning the handle

to the left

Automatic mode

1. Set the float switch using the height adjustment, and

the cable length between the float switch and the

lock.

Note

When the pump is operated unattended, always set the

float switch to the uppermost position in order to ensure

that the pump can switch off reliably.

Illustration G

When the float switch is set to the lowermost position,

set the cable length between the float switch and the

lock to 2.5 cm, see marking on the cable.

Illustration H

2. Move the filter basket into the "Waste water and

clear water delivery" position, see chapter Adjusting

the filter basket.

3. Plug the mains plug into the socket.

Note

In automatic mode, the float switch controls the pump-

ing process automatically. The pump switches on as

soon as the float switch reaches the switch-on height

caused by the rising fluid level.

The pump switches off when the float switch reaches

the switch-off height caused by the sinking fluid level.

The float switch must be able to move freely.

Note

The switching heights vary depending on:

●Position of the float switch.

●Cable length between the float switch and lock.

The cable length must be at least 2.5 cm. We would

recommend retaining the set cable length. For infor-

mation on the switching heights, see chapter Spec-

ifications.

Manual operation

Note

In manual operation, the pump stays switched on.

The specified residual liquid level (see chapter Specifi-

cations) can only be achieved via manual operation.

1. Fasten the float switch in the lock pointing upwards.

Illustration I

2. Move the filter basket to the desired position de-

pending on the fluid level (see chapters Specifica-

tions and Adjusting the filter basket).

Waste water and clear water delivery.

We would recommend this filter basket po-

sition at the start of the pumping process,

since on this occasion the pumping capaci-

ty is at its greatest.

Flat vacuuming.

In this filter basket position, flat vacuuming

is possible up to 1 mm residual fluid height

in manual operation.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SP 16.000 Dual Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info