Bedienungsanleitung Karcher SV 1905 (Seite 19 von 276) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

478156

Zoom out

Zoom in

Vorherige Seite

1/276

Nächste Seite

– 9

ƽ Caution!

Switch off the machine. The air exit filter

can get damaged if you immediately restart

the machine.

 To resume cleaning operations, follow

the procedure described in the chapter

"Emptying and cleaning the water filter

container"; then refill water till the re-

quired water level is reached.

 Press the main switch (1).

The first stage of the indicator lamps -

Vacuum cleaning (5) starts to blink.

 Press the steam boiler switch (2); it then

glows.

 Wait till the indicator lamp - Pressure

level (4) glows. The machine is now

ready for steam operations.

 Press the Steam switch (A4) on the

handle.

Steam will be let out so long as you

press they switch (A4).

 Press the steam boiler switch (2) to stop

steam operations.

You can otpmise the steam outflow by

pressing the steam switch for steam regu-

lation (8) (Fig. 7).

 To increase the steam outflow: Turn the

rotary knob clockwise.

 To decrease the steam outflow: Turn

the rotary knob anti-clockwise.

– Mild steam: (Setting 1-2)

To sprinkle water on plants, clean fabrics,

tapestries, uphostered furniture, etc.

– Normal steam: (Setting 3)

For carpeted floors, carpets, window

panes, floors.

– Heavy steam: (Setting 4-5)

To remove hard dirt, stains and grease.

The water reservoir may be refilled at any time.

Note: If there is not enough water in the

steam boiler the pump automatically sup-

plies water from the water reservoir into the

steam boiler. If the water reservoir is empty,

the pump is not able to fill the steam boiler

and the steam tapping is blocked.

 When there is water deficit in the water

reservoir, the indicator lamp - water def-

icit (3) glows and is indicated through a

sound.

 To continue, follow the description in

section "Filling the water reservoir"

 Press the main switch (1).

The first stage of the indicator lamps -

Vacuum cleaning (5) starts to blink.

 Press the steam boiler switch (2); it then

glows.

 Wait till the indicator lamp - Pressure

level (4) glows. The machine is now

ready for steam operations.

 Press the switches Steam (A4) and the

Vacuum cleaning switch (A3) briefly at

the same time on the handle (A).

The vacuum cleaning operation starts

at minimum performance level and

steam is let out simultaneously.

For proper use of steam and vacuum clean-

ing function refer chapter Steam opera-

tions“ and „Vacuum cleaning operation“.

During short breaks in work, the steam suc-

tion pipe can be parked in the parking hold-

er (14) (Fig. 9).

 Press the main switch (1).

 Disconnect the mains plug from the

socket.

 Remove the steam plug (B1) from the

machine. Keep the steam lock (B2) de-

pressed and pull out the steam plug

from the machine socket (Fig. 6a).

Steam operations

Setting the steam outflow

Filling the Water Reservoir

Steam and vacuum cleaning

operation

Putting Down the Accessories

Finish operation

19EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher SV 1905 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info