Bedienungsanleitung Karcher VC 6 Cordless Premium ourFamily (Seite 14 von 164) (Alle Sprachen)

803790

Zoom out

Zoom in

Vorherige Seite

1/164

Nächste Seite

14 English

Note

When the device is switched off, the boost function is

automatically disabled.

The boost function can also be switched off by pressing

the Boost button again.

Ending operation

1. Switch off the device.

Release the On/Off switch or disable the locking le-

ver.

Note

To ensure an optimum suction performance, empty the

dust container and clean the air inlet filter after each

use.

Empty the dust container at the latest when the "MAX"

marking is reached.

2. Remove the suction pipe or accessory.

3. Empty the dust container into a waste container.

a Press the unlocking button.

The dust container flap opens.

b Empty the dust container.

Illustration L

4. To close the flap, push the dust container up until it

clicks into place.

5. Clean the air inlet filter, see chapter Cleaning the air

inlet filter

6. Attach the device to the wall bracket with charging

function.

Illustration F

7. Store the accessories.

Illustration Z

8. Charge the device with a battery or only a battery,

see chapter Battery charging.

How to use the Accessories

General instructions for use

Which accessories are included in the scope of de-

livery is shown on the device packaging.

Accessories not included in the packaging can be

purchased in a KÄRCHER specialist shop or from

www.kaercher.com.

Test the accessory at an inconspicuous point before

using it in a sensitive area.

Follow the manufacturer's cleaning instructions.

Connect the motor-driven electric nozzle to the suc-

tion pipe or the hand-held device.

Also connect the other accessory parts, such as

crevice nozzle, to the hand-held device or push it di-

rectly onto the suction pipe to increase the reach.

Motor-driven multi-function brush

Ideal for hard floors and carpets.

The motor-driven multi-function brush removes dirt

stuck between the carpet fibres particularly effectively.

2-in-1 upholstery nozzle

The frame with the surrounding bristles can be taken off

pressing the unlocking button.

●The soft brush is suitable for furniture with hard sur-

faces

●The wide brush is used to clean upholstered furni-

ture, curtains, etc.

Crevice nozzle

For edges, joints, heaters and areas that are difficult to

reach.

Soft brush

The soft brush has particularly soft bristles for cleaning

sensitive surfaces such as keyboards, lamps, etc.

Flexible crevice nozzle

The flexible crevice nozzle increases the reach. For

cleaning hard-to-reach places, such as between the car

seats.

Flexible extension hose

Due to the extension and flexibility, hard-to-reach areas

such as in the car can be reached and cleaned.

Large upholstery nozzle

For cleaning textile surfaces such as sofas, armchairs,

mattresses, car seats, etc.

Soft motor-driven brush (Hard floor nozzle)

For hard floors and sensitive wooden floors. Extracts

coarse and fine dirt simultaneously.

Transportation

The battery has been tested in accordance with the rel-

evant rules for international transport, and can be

transported / shipped.

Storage

ATTENTION

Moisture and heat

Risk of damage

Store battery packs indoors only, at low humidity and

temperatures below 20°C.

The battery pack display shows the current charging

state during storage.

Care and service

General care instructions

Clean the device and plastic accessory parts with a

commonly available plastic cleaner.

Cleaning the air inlet filter

Note

The device can be cleaned manually or using a filter

cleaning device.

Cleaning the air inlet filter manually

1 Switch off the device.

2 Pull the soiled air inlet filter down at the filter stick,

carefully beat it and clean it with a damp cloth or run-

ning water.

Illustration M

a Reinsert the fully dried air inlet filter.

b Check for correct seating.

Cleaning the air inlet filter with a filter cleaning de-

vice

Note

A new air inlet filter must be installed in the dust contain-

er during filter cleaning.

1 Switch off the device.

2 Push the filter cleaning device on to the suction pipe

branch and pull the air inlet filter out of the device us-

ing the filter stick.

Illustration N

a Push the soiled air inlet filter into the filter clean-

ing device.

b Insert a new air inlet filter into the dust container.

c Switch on the device and let it run in boost mode

while turning the side cover.

Illustration O

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher VC 6 Cordless Premium ourFamily Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info