Bedienungsanleitung Karcher VC 7 Cordless yourMax (Seite 13 von 184) (Alle Sprachen)

803788

Zoom out

Zoom in

Vorherige Seite

1/184

Nächste Seite

English 13

28 ** Large upholstery nozzle

29 ** LED crevice nozzle

30 ** Extension hose

31 ** Flexible crevice nozzle

32 ** Removable battery (2x)

33 ** Soft brush

34 ** Free-standing parking station

35 ** Soft motorized brush (hard floor nozzle)

* EN 1822:1998

** optional

Installing the wall bracket /

free-standing parking station

with charging function

The scope of delivery includes either a wall bracket or a

free-standing parking station with charging function for

correct storage of the vacuum cleaner and accessories.

●Installing the wall bracket

Note

Mount the wall bracket at a suitable point using the

screws and dowels supplied.

For safe storage of the device, the lower screw fasten-

ing of the wall bracket should be placed at a distance of

0.83-0.85 m from the floor.

Illustration F

ATTENTION

Material damage due to incorrect installation

Incorrect installation can damage both the device and

the floor covering if it falls.

Use suitable mounting tools for wall mounting.

Take the weight of the device and the loading capacity

of the installation location into account when selecting

the fasteners.

몇WARNING

Risk of electric shock and injuries

Make sure there are no electrical cables, water or gas

pipes in the wall around the mounting area.

●Installing the free-standing parking station

Note

Installation on the wall is not necessary.

1 Assemble the base, connecting tube and bracket so

that they audibly click into place.

2 Place the unit in the support.

Illustration G

ATTENTION

Risk of injury or damage to property

If the parking station is placed in an unfavourable posi-

tion (e.g. in the middle of a room), this constitutes a trip-

ping hazard and may result in injury and/or it can fall

over and damage the unit.

Place the unit with the parking station in a safe, quiet

place (e.g. wall, corner).

Note

Removal is carried out by pressing the unlocking but-

tons on the rear side of the parking station on the base

and support.

Initial startup

Installing accessories

Note

The multi-function brush is also driven by its own inte-

grated motor and must therefore always be connected

directly to the hand-held device or the suction pipe in or-

der to ensure the power supply.

All other accessor parts can also be used directly with

the hand-held device or with the suction pipe to increase

the reach.

Push the suction pipe on to the suction fitting of the

dust container until it audibly clicks into place.

Press the unlocking button and remove the suction

pipe from the suction fitting.

Illustration B

Push the floor nozzle on to the suction pipe until it

audibly clicks into place.

Press the unlocking button and remove the floor

nozzle from the suction pipe.

Illustration C

Push accessory, such as the crevice nozzle, on to

the suction fitting of the dust container or suction

pipe until it audibly clicks into place.

Illustration D

Inserting the battery

ATTENTION

Dirty contacts

Damage to the device and battery

Check the battery mount and the contacts for soiling

and clean them as necessary before inserting the bat-

tery.

Note

Use only fully charged batteries.

1. Push the battery into the mounting in the device until

it audibly latches into place.

Illustration E

Battery charging

Note

The device is not supplied with a charged battery. Fully

charge the battery before using it for the first time.

Please observe the enclosed safety instructions for bat-

tery powered vacuum cleaners.

Note

The battery can be charged with the device or separate-

ly (e.g. for variants with an additional battery).

Note

For a detailed description of the LED displays, see

chapter LED display

1. Charge the battery with the device.

To charge the device, attach it to the wall bracket

with charging function included in the scope of

delivery.

Illustration F

2. Charge the battery separately.

Place the battery on a flat and safe surface to

charge it.

ATTENTION

Material damage due to incorrect battery storage

Incorrect storage during charging can result in the battery

e.g. falling down or damaging heat-sensitive surfaces.

Make sure charging of the separate battery takes place

on a flat, smooth and heat-insensitive surface.

Furthermore, the battery should not be covered with ob-

jects (e.g. fabrics or papers) while it is being charged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher VC 7 Cordless yourMax Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info