Bedienungsanleitung Karcher WD 3 (Seite 13 von 162) (Alle Sprachen)

724821

Zoom out

Zoom in

Vorherige Seite

1/162

Nächste Seite

– 8

Recommendation: In order to vacuum the floor, attach

the handle to the suction hose.

Illustration

 Connect the handle with the suction hose until it

snaps in place.

Illustration

 To remove the handle from the suction hose, press

the notch using your thumb and pull off the handle.

Note: Due to removing the handle, accessories can be

directly attached to the suction hose.

Recommendation: In order to vacuum the floor, attach

the handle to the suction hose.

See position 13.

Illustration

 Put both suction tubes together and connect them

with the handle.

 For edges, joints, heaters and hard to reach loca-

tions.

Illustration

For appliances with only one insert:

 Note: For vacuuming dry dirt or water off the floor -

always work with the insert (brush strip and rubber

lip) in the floor nozzle.

For appliances with two inserts:

 When vacuuming dry dirt off the floor, clip an insert

with two brush strips into the floor nozzle.

 When vacuuming water off the floor, clip an insert

with two rubber lips into the floor nozzle.

Illustration

 To connect the suction hose with an electric tool

 Adapt the adapter to the connection diameter of the

electric tool using a knife if necessary.

ATTENTION

Always work with an inserted cartridge filter during wet

as well as dry vacuum cleaning!

Illustration

 Mount loose parts delivered with appliance prior to

start-up.

Illustration

 Connect accessories.

Illustration

 Plug in the mains plug.

Illustration

 Turn on the machine.

ATTENTION

Check the filter for damage prior to installation and re-

place as necessary.

Work with a dry cartridge filter only!

Illustration

 Recommendation: To vacuum fine dust, use the

filter bag.

– The filling level of the filter bag depends on the dirt

that is sucked in.

– The filter bag needs to be replaced more frequently

while sucking in fine dust, sand, etc.

– Clogged filter bags can burst - therefore make sure

to replace the filter bag in a timely manner!

ATTENTION

Vacuum cold ashes only when using a pre-filter.

Order no. basic design: 2.863-139.0, premium design:

2.863-161.0.

 For vacuuming up moisture or wetness pay atten-

tion to the correct floor nozzle insert and connect

the corresponding accessories.

ATTENTION

Do not use a filter bag!

Note: If the container is full, a float closes the suction

opening, and the appliance works at a higher speed.

Switch off the appliance immediately, and empty the

container.

Illustration

 Adapt the adapter to the connection diameter of the

electric tool using a knife if necessary.

 Connect the adapter to the handle of the suction

hose and connect it to the electric tool connection.

Connect the mains plug of the electric power tool to

the vacuum cleaner.

Illustration

 Switch the vacuum cleaner to Position II and start

working.

Removable handle

Suction tubes 2 x 0.5 m

Crevice nozzle

Floor nozzle

(with inserts)

Adapter

Operation

Before Startup

Start up

Dry vacuum cleaning

Information filter bag

Wet vacuum cleaning

Working with electrical power tools

13EN

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Karcher WD 3 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info