631835
52
Zoom out
Zoom in
Vorherige Seite
1/64
Nächste Seite
52
Example 3 for controlling 8 satellite positions per DiSEqC
TM
switch:
Band bit Repeat Position Band bit Position bit UC1 bit
+ 22 kHz + 22 kHz + Position
Here is the necessary setting in the Setup menu: for using this con guration in TV mode (receiver).
Setup/Installation/Satellites ...
Name all the necessary satellites (1-16) in this menu and enter the LOs,
Setup/Installation/DiSEqC
TM
...
Set the 22 kHz signal to “ON”
Set the Uncommitted Switches to “ON”
Setup/Installation/DiSEqC
TM
/DiSEqC
TM
Con guration/Uncommitted Switches
Set the DiSEqC
TM
repeat to “1” (so the switch obtains a directly connected LNB)
Setup/Installation/DiSEqC
TM
/DiSEqC
TM
Con guration/Uncommitted Switches/Position
Switch 1: Pos 1_1=here set the 1
st
satellite
Switch 1: Pos 1_2=here set the 2
nd
satellite
Switch 1: Pos 1_3=here set the 3
rd
satellite
Switch 1: Pos 1_4=here set the 4
th
satellite
Switch 2: Pos 2_1=here set the 5
th
satellite
Switch 2: Pos 2_2=here set the 6
th
satellite
Switch 2: Pos 2_3=here set the 7
th
satellite
Switch 2: Pos 2_4=here set the 8
th
satellite
...At this point the available Sat positions that can be addressed by DiSEqC
TM
1.1 are set.
Thus must also be done if several DiSEqC
TM
switches are to be operated in sequence.
In this con guration, eight satellites can now be connected in the DiSEqC
TM
bit sequence:
UC1 (Pos 1-4/5-8), then Option (Pos 1-2/3-4/5-6/7-8), then Position (1/2 or 3/4 or 5/6 or 7/8),
then Band (Low/High), then Polarisation (Hor./Vert.), i.e. each bit branches the signal like a set of
points.
Once everything has been properly set up, the rst softkey can be pressed in TV mode to call up the
SAT list with the 8 satellite settings. Where the list includes a newly generated satellite, it may that a
channel scan has to be performed. This is done under: SETUP/Search/Satellite ... Start (see under
“Channel scan by satellite lists”).
TECHNICAL APPENDIX
LNB 3
Pos 1
Pos 2
Pos 3
Pos 4
A
Uncomm.
switch
B
Pos 5
Pos 6
Pos 7
Pos 8
Receivers
or
Meter
DqC 1.1
LNB 4
LNB 5
LNB 6
LNB 7
LNB 8
Pos 1
Pos 2
Also the 8-way
switch
LNB 1
LNB 2
CIRCUIT EXAMPLES FOR SYSTEMS WITH MULTIPLE SATELLITES
52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kathrein MSK 120 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kathrein MSK 120

Kathrein MSK 120 Bedienungsanleitung - Deutsch - 64 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info