500335
21
Zoom out
Zoom in
Vorherige Seite
1/36
Nächste Seite
Installation Menu
21
In this menu, you can carry out the programme search.
1) AutoScan
All channels in the range of 177 MHz to 858 MHz are
searched for programmes.
2) Net Scan
The entire network is searched for network information.
(Results only if this information is transmitted with the
programmes).
3) TP Scan
Search for individual channels.
4) PID
Enter audio and video PID for a detailed search for individual
programmes.
5) Scan Mode
Selection of: All or FTA (free-to-air programmes only) – when
you run a programme search for all programmes, all
programmes are stored, including the encoded transmitters;
otherwise, only the free programmes are stored.
Programme Scan:
Note: In addition to the indicator of reception intensity and reception quality,
the receiver has an assist function with a acoustic signal for adjusting
the antenna, you can activate in this menu by pressing the Mute key.
With the red key you can start the programme search for the entire
frequency range. The receiver prompts you to confirm that you wish to
delete the existent programmes. If you confirm with «JA», all the
allocated programmes are deleted and the new programming entered
in the main list (in order of the factory-set pre-programming at the
factory).
If you select «EXIT», the programme search will not be started.
Note: Should you be in the catchement area of two DVB-T networks, it
may happen that you find some channels twice in your
programme list after you run the “AutoScan”. You can leave them
as they are, or you can decide in favour of the programme which
provides the better image (reception), and delete the other one.
Start the scan by pressing the green key for a specific channel. The
programmes that are found will be added on the end of the programme
list.
PID (Programme Identification) input:
Press the yellow key, enter the video PID and the audio PID, and
press the yellow key again. The programme, identified with «TV CH»,
will be placed at the end of the main list.
21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kathrein UFE 371-S wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kathrein UFE 371-S

Kathrein UFE 371-S Bedienungsanleitung - Deutsch - 36 seiten

Kathrein UFE 371-S Bedienungsanleitung - Italienisch - 36 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info