Bedienungsanleitung Kathrein UFS 712 (Seite 3 von 72) (Englisch)

631772

Zoom out

Zoom in

Vorherige Seite

1/72

Nächste Seite

The channels available on the satellites and transponders are subject to continual change. If changes

do occur, the new channels have to be set in the receiver because the factory preset programming

corresponds to the status on the date of manufacture. The information for these settings can be found on

the Internet or in relevant magazines.

Your receiver is factory ﬁ tted with the latest software version. We are, however, constantly working on

adapting the software in response to the wishes of our customers and to developments in technology.

The “Software Update” section provides more information on this.

Please keep the original packaging in case you need to return the product at any time!

If the product is not properly packed, the warranty claim is invalidated.

Make a note of the receiver‘s basic settings, so as to be able to restore them if necessary!

DiSEqC™ is a trademark of Eutelsat.

UFO

micro is a trademark of KATHREIN-Werke KG.

IMPORTANT INFORMATION

Electronic equipment is not domestic waste - in accordance with directive 2002/96/EC

OF THE EUROPEAN PARLIAMENT AND THE COUNCIL dated 27

January 2003 on used

electrical and electronic appliances, it must be disposed of properly.

At the end of its service life, take this unit for disposal to an appropriate ofﬁ cial collection

point.

Used batteries are special waste!

Do not throw spent batteries into your domestic waste; take them to a collection point for

old batteries!

DISPOSAL INSTRUCTIONS

SWITCHING OFF THE RECEIVER AND UPDATING THE EPG

By pressing the



button you can switch the receiver out of TV mode and into standby mode. Pressing any

of the numeric buttons returns it from standby mode into operating mode.

Every night at 03:00 the receiver automatically starts to update the EPG data. This updates the EPG data

for the ﬁ rst 25 channels of the overall channel list. This update happens however only if the receiver is in

standby mode. If the receiver is completely switched off (at the mains) or if it is in operation, the update will

be delayed. The receiver will update the EPG data when it is next switched from operating mode into standby

mode. After updating the data, the receiver automatically switches back to standby. You can however by

pressing the



button break off the update before it is ﬁ nished; the receiver then switches immediately into

standby mode.

REFERENCE NOTE ON AUDIO MPEG INC. AND S.I.SV.EL, S.P.A:

This device employs legally protected technologies which are protected by patents in the USA as well as by

intangible property laws in other countries.

Audio MPEG Inc. and Societa‘ Italiana per lo sviluppo dell‘elettronica, S.I.SV.EL, S.P.A, have granted

KATHREIN-Werke KG rights of use which are subject to certain restrictions. These restrictions must also be

observed by you as a customer.

According to these, this device is only to be used by end customers for private, non-commercial purposes

and for licensed content. Use for commercial purposes is not authorised. Utilisation of products or proce-

dures sold or used with this device are not comprehended. With reference to licensed technologies, applica-

tion of reversible procedures as well as dismantling of the device are both not permitted.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kathrein UFS 712 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kathrein UFS 712

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info