27361
42
Zoom out
Zoom in
Vorherige Seite
1/60
Nächste Seite
42
8.2.8 LCD Contrast
This parameter adjusts the contrast of the LCD display.
As the value changes higher, the contrast gets sharper. The value changes
from 0 to 10.
8.2.9 LED Brightness
This adjusts the brightness of the LEDs. You can choose from High or Low.
The Low setting is designed for dark stages, while the High setting is good
for bright ambience.
8.2.10 Out Mode
Sometimes it is convenient to have two mono outputs instead of a stereo
output.
In this case one mono output can be used for your own monitor system and
the other goes to the mixing console.
Stereo: The signal on the Line-Outs is normal stereo.
2xMono: The signal on the Line-Outs is mono on both jacks
Note:
To avoid unexpected sounding some stereo effects like AutoPan will be
turned off, when 2xMono is selected.
8.3 System Dump
8.3.1 Dump Current
This function transmits the current and active settings of the MP4 as a System
Exclusive Message via the MIDI OUT.
Press the SYSTEM button. Then press the MENU-UP button until “Dump
Current” appears on the display.
Press the VALUE-UP button. The display will ask for confirmation.
To cancel Dump Current at this point, press the VALUE-DOWN button.
Otherwise, press the VALUE-UP button again.
The display will change to read “Completed!!”. Dump Current is complete.
Note:
Loading the data back to the MP4 will change the current settings.
SETUP and SYSTEM data will not change. You can use this function to
temporarily change the setting from your sequencer. If you want to
save the setting, you must use the STORE procedure and save as Setup.
8.3.2 Dump All
This function transmits all the Setups of the MP4 as System Exclusive
Messages via the MIDI OUT. Use this function to backup your Setups on an
external MIDI sequencer.
Dump Current
Press VALUE UP
Dump Current
Sure?
Dump Current
Completed!!
SYSTEM
LCD Cont. = 10
SYSTEM
LED Bright.=High
SYSTEM
Out Mode =Stereo
42

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kawai MP4 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Kawai MP4

Kawai MP4 Bedienungsanleitung - Deutsch - 60 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info