Bedienungsanleitung Kaysun Aquantia Hidraulic Kit - KHHP-BI (Seite 16 von 45) (Englisch)

771433

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Page 16 

NOTE:

The hydraulic module has no separate

sewage outlet.

Care and Maintenance

Cleaning Your Unit

BEFORE CLEANING OR

MAINTENANCE

ALWAYS TURN OFF YOUR AIR CONDITIONER

SYSTEM AND DISCONNECT ITS POWER SUPPLY

BEFORE CLEANING OR MAINTENANCE.

CAUTION

Only use a soft, dry cloth to wipe the unit clean.

If the unit is especially dirty, you can use a cloth

soaked in warm water to wipe it clean.

•

Do not

use chemicals or chemically treated

cloths to clean the unit

•

Do not use benzene, paint thinner,

polishing powder or other solvents to clean

the unit. They can cause the plastic surface

to crack or deform.

•

Do not use water hotter than 40°C (104°F)

to clean the front panel. This can cause the

panel to deform or become discolored.

WARNING: DO NOT REMOVE OR

CLEAN THE UNIT BY YOURSELF

Removing and cleaning the unit can be

dangerous. Removal and maintenance must be

performed by a certiﬁed technician.

Maintenance

CAUTION

•

Any maintenance and cleaning of outdoor

unit should be performed by an authorized

dealer or a licensed service provider.

•

Any unit repairs should be performed

by an authorized dealer or a licensed

service provider.

Before cleaning the lter, close the water pipe

externally connected to the hydraulic module,

drain the water, unscrew the Y-type lter, and

pull out the lter.

Some metal edges and evaporator ns are sharp

and improper operation may cause injury, so be

careful when cleaning these parts.

The maximum water pressure is 3 bar,but the

best pressure range is between 1 to 2 bar. It will

be perfect, if the water pressure is the same as

pre-pressure of expansion vessel.

In order to ensure optimal availability of the unit,

a number of checks and inspections on the unit

and the eld wiring have to be carried out at

regular intervals.

● Water pressure

When the pointer of the water pressure gauge

is in the red area or check if the water pressure

is above 0.5 bar. If necessary add water.

● Water lter

Clean the water lter.

●Water pressure relief valve

Check for correct operation of the pressure relief

valve by turning the red knob along the valve

counter-clockwise:

1. If you do not hear a clacking sound, contact

your local dealer.

2. In case the water keeps running out of the unit,

close both the water inlet and outlet shut-o

valves rst and then contact your local dealer.

●Pressure relief valve hose

Check that the pressure relief valve hose is

positioned appropriately to drain the water.

If the drain pan kit is installed, make sure that

the pressure relief valve hose end is positioned

in the drain pan.

Care and

Maintenance

The described checks must be executed at

least once a year:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun Aquantia Hidraulic Kit - KHHP-BI Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun Aquantia Hidraulic Kit - KHHP-BI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info