Bedienungsanleitung Kaysun Aquantia PRO Bibloc Wall-Mounted Outdoor KHP-BI (Seite 7 von 48) (Englisch)

771522

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Before touching electric terminal parts, turn off power switch.

When service panels are removed, live parts can be easily touched by accident.

Never leave the unit unattended during installation or servicing when the service panel is removed.

Do not touch water pipes during and immediately after operation as the pipes may be hot and could burn your

hands. To avoid injury, give the piping time to return to normal temperature or be sure to wear protective gloves.

Do not touch any switch with wet fingers. Touching a switch with wet fingers can cause electrical shock.

Before touching electrical parts, turn off all applicable power to the unit.

DANGER

Tear apart and throw away plastic packaging bags so that children will not play with them.Children playing

with plastic bags face danger of suffocation.

Safely dispose of packing materials such as nails and other metal or wood parts that could cause injuries.

Ask your dealer or qualified personnel to perform installation work in accordance with this manual. Do not install the

unit yourself. Improper installation could result in water leakage, electric shocks or fire

Be sure to use only specified accessories and parts for installation work. Failure to use specified parts may result in

water leakage, electric shocks, fire, or the unit falling from its mount.

Install the unit on a foundation that can withstand its weight. Insufficient physical strength may cause the equipment

to fall and possible injury.

Perform specified installation work with full consideration of strong wind, hurricanes, or earthquakes. Improper

installation work may result in accidents due to equipment falling.

Make certain that all electrical work is carried out by qualified ersonnel according to the local laws and regulations

and this manual using a separate circuit. Insufficient capacity of the power supply circuit or improper electrical

construction may lead to electric shocks or fire.

Be sure to install a ground fault circuit interrupter according to local laws and regulations. Failure to install a ground

fault circuit interrupter may cause electric shocks and fire.

Make sure all wiring is secure. Use the specified wires and ensure that terminal connections or wires are protected

from water and other adverse external forces. Incomplete connection or affixing may cause a fire.

When wiring the power supply, form the wires so that the front panel can be securely fastened. If the front panel is

not in place there could be overheating of the terminals, electric shocks or fire.

After completing the installation work, check to make sure that there is no refrigerant leakage.

Never directly touch any leaking refrigerant as it could cause severe frostbite.Do not touch the refrigerant pipes

during and immediately after operation as the refrigerant pipes may be hot or cold, depending on the condition of

the refrigerant flowing through the refrigerant piping, compressor and other refrigerant cycle parts. Burns or frostbite

are possible if you touch the refrigerant pipes. To avoid injury, give the pipes time to return to normal temperature

or, if you must touchthembe sure to wear protective gloves.

Do not touch the internal parts (pump, backup heater, etc.) during and immediately after operation. Touching the

internal parts can cause burns. To avoid injury, give the internal parts time to return to normal temperature or, if you

must touch them, be sure to wear protective gloves.

WARNING

Ground the unit.

Grounding resistance should be according to local laws and regulations.

Do not connect the ground wire to gas or water pipes, lightning conductors or telephone ground wires.

Incomplete grounding may cause electric shocks.

- Gas pipes：Fire or an explosion might occur if the gas leaks.

- Water pipes：Hard vinyl tubes are not effective grounds.

- Lightning conductors or telephone ground wires：Electrical threshold may rise abnormally if struck by a lightning

bolt.

Install the power wire at least 3 feet (1 meter) away from televisions or radios to prevent interference or noise.

(Depending on the radio waves, a distance of 3 feet (1 meter) may not be sufficient to eliminate the noise.)

Do not wash the unit. This may cause electric shocks or fire. The appliance must be installed in accordance with

national wiring regulations. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.

CAUTION

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun Aquantia PRO Bibloc Wall-Mounted Outdoor KHP-BI Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun Aquantia PRO Bibloc Wall-Mounted Outdoor KHP-BI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info