Bedienungsanleitung Kaysun COMPAK KHP (Seite 5 von 23) (Englisch)

771580

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

Installation & Owner's Manual

Display

Air

outlet

Barrier

≥600

650

≥600 ≥600

Air

inlet

Φ650

≥600

≥800

≥600

650

1920

● This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety. Children should be supervised

to ensure that they do not play with the appliance.

● If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualied person.

● DISPOSAL: Do not dispose this product as

unsorted municipal waste. Collection of such

waste separately for special treatment is

necessary.

Do not dispose of electrical appliances as

unsorted municipal waste, use separate collection

facilities. Contact your local government for

information regarding the collection systems

available.

If electrical appliances are disposed of in landfills or dumps,

hazardous substances can leak into the groundwater and get into

the food chain, damaging your health and well-being.

CAUTION

● The earthing pole of socket must be grounded well, make

sure that power supply socket and plug are dry enough and

connected tightly.

● How to check the power supply socket and plug are qualied?

Turn on power supply and keep the unit running for a half hour,

then turn off power supply and plug out, check whether the

socket and plug is hot or not.

● Before cleaning, be sure to stop the operation and turn the

breaker off or pull out the power plug.

Otherwise, an electric shock and injury may be caused.

● Water temperature over 50 ℃ can

cause severe burns instantly or

scalds. Children, disabled and

elderly are at highest risk of being

scalded. Feel water before bathing

or showering. Water temperature

limiting valves are recommanded.

● Do not operate the unit with a wet hand.

An electric shock may be caused.

● The installation height of power supply should be over 1.8m, if

there is any water spattered, separate the power supply from

water.

● A one-way valve must be installed on the water inlet side,

which is available from accessories, see manual "accessories"

part.

● It’s normal if some water drops from the hole of PTR valve

during operation. But, if there is a great amount of water, call

your service agent for instructions.

● After a long term use, check the unit base and ttings.

If damaged, the unit may sink and result in injury.

● Arrange the drain pipe to ensure smooth draining.

Improper drainage work may cause wetting of the building,

furniture etc.

● Do not touch the inner parts of the controller.

Do not remove the front panel. Some parts inside are

dangerous to touch, otherwise a machine malfunction may be

caused.

● Do not turn off the power supply.

System will stop or restart heating automatically. A continuous

power supply for water heating is necessary, except service and

maintenance.

● If the unit has not been used for a long period of time(2 weeks or

more), hydrogen gas will be produced in the water piping system.

Hydrogen gas is extremely ammable. To reduce the risk of injury

under these conditions, it is recommended that open the hot

water tap for several minutes at the kitchen sink before using any

electrical appliance connected to the hot water system. When

hydrogen is present, there will probably be an unusual sound

such as air escaping through the pipe as the water begins to ow.

There should be no smoking or open flame near the tap at the

time it is open.

2. BEFORE INSTALLATION

2.1 Unpacking

2.1.1 Accessories

Table.2-1

Accessory Name Qty. Shape Purpose

Owner’s &

Installation Manual 1Installation and use

instruction This manual

One Way Valve 1Prevent water from owing

backwards

Adaptor 1Drain condensate water

2.1.2 How to transport

1) In order to avoid scratch or deformation

of the unit surface, apply guard boards to

the contacting surface.

No contact of ngers and other things with

the vanes.

Don’t incline the unit more than 15°

in moving, and keep it vertical when

installing.

2) This unit is heavy, it need to be carried by two or more persons,

othewise might cause injury and damage.

2.2 Location requirements

1) Enough space for installation and maintenance shall be

preserved.

2) The air inlet and outlet should be free from obstacles and strong

wind.

3) The base surface should be flat, surface should be inclined no

more than 2° and able to bear the weight of the unit and suitable

for installing the unit without increasing noise or vibration.

4) The operation noise and air flow expelled shall not affect

neighbors.

5) No ammable gas is leaked nearby.

6) It is convenient for piping and wiring.

7) If it is installed in indoor space, it might cause indoor temperature

decreased and noise. Please take preventive measures for this.

8) If the unit has to be installed on a metal part of building, make

sure the well electric insulation which should meet the relevant

local electric standard.

Gradient limit>75°

>75°

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun COMPAK KHP Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info