Bedienungsanleitung Kaysun KAY-CF 71 DR8 (Seite 9 von 36) (Englisch)

771401

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

SLEEP Operation

Cool mode (+1ºC/2ºF) per hour for the

rst two hours

Heat mode (-1ºC/2ºF) per hour for the

rst two hours

Set

temperatura Keep running

Saving energy during sleep

Range

Fig. A

Fig. B

Deector rod

 Page 9 

Other Features

• Auto-Restart (some units)

If the unit loses power, it will automatically restart with the

prior settings once power has been restored.

• Anti-mildew (some units)

When turning off the unit from COOL, AUTO (COOL), or

DRY modes, the air conditioner will continue operate at

very low power to dry up condensed water and prevent

mildew growth.

• Wireless Control (some units)

Wireless control allows you to control your air conditioner

using your mobile phone and a wireless connection.

For the USB device access, replacement, maintenance

operations must be carried out by professional staff.

• Louver Angle Memory (some units)

When turning on your unit, the louver will automatically

resume its former angle.

• Refrigerant Leakage Detection (some units)

The indoor unit will automatically display "EC" or "EL0C" or

ash LEDS (model dependent) when it detects refrigerant

leakage.

• Sleep Operation

The SLEEP function is used to decrease energy use while

you sleep (and don't need the same temperature setting

to stay comfortable). This function can only be activated

via remote control. And the Sleep function is not available

in FAN or DRY mode.

Press the SLEEP button when you are ready to go to

sleep. When in COOL mode, the unit will increase the

temperature by 1ºC (2ºF) after 1 hour, and will increase

an additional 1ºC (2ºF) after another hour. When in HEAT

mode, the unit will decrease the temperature by 1ºC (2ºF)

after 1 hour, and will decrease an additional 1ºC (2ºF)

after another hour.

The sleep feature will stop after 8 hours and the system

will keep running with nal situation.

• Setting Angle of Air Flow

Setting vertical angle of air ow

While the unit is on, use the SWING/DIRECT button

on remote control to set the direction (vertical angle) of

airow. Please refer to the Remote Control Manual for

details.

NOTE ON LOUVER ANGLES

When using COOL or DRY mode, do not set louver at

too vertical an angle for long periods of time. This can

cause water to condense on the louver blade, which

will drop on your oor or furnishings.

When using COOL or HEAT mode, setting the louver

at too vertical an angle can reduce the performance

of the unit due to restricted air ow.

(The vertical louver auto swing is an optional function)

Setting horizontal angle of air ow

The horizontal angle of the airow must be set

manually. Grip the deector rod (See Fig. B) and

manually adjust it to your preferred direction.

For some units, the horizontal angle of the airow can

be set by remote control. Pleade refer to the Remote

Control Manual.

NOTE: Do not move louver by hand. This will cause the

louver to become out of sync. If this occurs, turn off the

unit and unplug it for a few seconds, then restart the unit.

This reset the louver.

CAUTION

Do not put your ngers in or near the blower and suction

side of the unit. The high-speed fan inside the unit may

cause injury.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun KAY-CF 71 DR8 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KAY-CF 71 DR8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info