Bedienungsanleitung Kaysun KCCT-64 I (Seite 14 von 28) (Englisch)

771517

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Installation & Owner‘s Manual

3. Mode locking

1) Effect

Under mode locking state, through centralized controller to operate the air conditioner, only can

choose the mode which has not conict with locking mode.

2) Operation

Can set the heating mode locking or cooling mode locking.

Under mode locking state, if set the new mode locking, it must be unlocking first, then can

operate the new mode locking.

① Can lock or unlock through the computer.

② Can operate by centralized controller.

In the centralized controller setting interface, choose all the air conditioners of the centralized

controller network as the object, press “ ” and hold on, then press “ ” to do the mode locking or

unlocking.

If the current state is mode locking, press the key to unlock.

If there’s no mode locking, press the key to lock.

4. Centralized controller key locking and unlocking

1) Effect

When centralized controller keys are locked, keys operation is invalid except “ ” key and

unlock keys.

2) Operation

1. Press “ ” key and hold on, then press “ ” key, the keys of centralized controller will be

locked or unlocked.

If the current state is key locking, press the key to unlock.

If no centralized controller key locking, press the key to lock.

2. When the backlight turns off, the keys will be locked automatically. Press any key to light the

backlight rst. Secondly, press “ ” key and hold on, press “ ” key to unlock keys. Then operation

to the controller is enabled.

The backlight will turn off and the keys will be locked automatically if there’s no operation

within 30 seconds.

2.3.5 ON and OFF operation

Use the “ ” key or “ ” key to do the ON and OFF operation for the air conditioners in the

centralized controller network.

The ON mode will accord to the system mode locking or other limit conditions for judging, if

there is conict, it will auto adjust to the next mode without conict; if all the modes have conict,

then it can not operate the unit.

1. Use “ ” key to ON and OFF the unit

Can operate a single air conditioner or all the air conditioners in the centralized controller

network.

1) Choose the object. Press “ ” key to choose a single air conditioner or all the airconditioners

in the centralized controller network. If choose a single air conditioner, then use “ ”, “ ”, “ ”, and

“ ” to choose the air conditioner.

2) Use “ ”, “ ”, “ ”, and “ ” to set the operating mode and operating parameters,such as fan

speed, setting temperature etc.

3) Use “ ” key, centralized controller send the relative order to the operating object.

After setting the operating parameter for the air conditioner, if not press the “ ” key the

setting parameter will not tbe sent to the air conditioner, and the current operation of the air

conditioner is not affected (except locking operation)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun KCCT-64 I Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KCCT-64 I

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info