771576
23
Zoom out
Zoom in
Vorherige Seite
1/32
Nächste Seite
21
The FOR SERVICEMAN is used for installer or service
engineer. It is NOT instended the home owener alters
setting with this menu.
It is for this reason password protection is requierd to
prevent unauthorised access to the service settings.
The password is 234.
6.9.3 How To Exit For SERVICEMAN
Active the setting and exit?
NO YES
CONFIRM
OK
FOR SERVICEMAN
If you have set all the parameter.
Press ''BACK'', the following page will appear
Select ''YES'' and press ''OK'' to exit the FOR
SERVICEMAN.
After exiting the FOR SERVICEMAN, the unit will be
turned off.
ADJUST
6.10 Network Configuration Guidelines
Do you want to restore the
WLAN setting and exit?
NO YES
CONFIRM
OK
RESTORE WLAN SETTING
The wired controller realizes intelligent control with a built-in
module, which receives control signal from the APP.
Before connecting the WLAN, please check for it if the router in
your environment is active and make sure that the wired
controller is well-connected to the wireless signal.
During the Wireless distribution process, the LCD icon “ ”
flashes to indicate that the network is being deployed. After the
process is completed, the icon “ ” will be constantly on.
6.10.1 Wired Controller Setting
The wired controller settings include AP MODE and RESTORE
WLAN SETTING.
ENTER
OK
WLAN SETTING
AP MODE
RESTORE WLAN SETTING
Activate the WLAN by interface. Go to "MENU"> "WLAN
SETTING"> "AP MODE".
Press"OK", the following page will appear:
Use ''
'' ''
'' to move to"YES", press "OK" to select AP mode.
Select AP Mode correspondingly on the mobile device and
continue the follow-up settings according to the APP prompts.
CAUTION
After enter Ap mode, if it’s not connected with mobile
phone, the LCD icon " " will flash 10 minutes then
disappear.
If it’s connected with the mobile phone, the icon " "
will be constantly display.
Restore WLAN setting by interface. Go to “MENU”> “WLAN
SETTING” > “RESTORE WLAN SETTING” .
Press"OK", the following page will appear:
Use ''◄'' ''►'' to move to "YES", press ”OK” to restore
WLAN setting.Complete the above operation and wireless
configuration is reset.
AP Mode connecting WLAN:
Do you want to activate the
WLAN network and exit?
NO YES
CONFIRM
OK
AP MODE
6.10.2 Mobile Device Setting
(1)1) Install
AP Mode is available for wireless distribution on mobile
device side.
23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Kaysun KCTAQ-02 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info