Bedienungsanleitung Kaysun KEM-07 DVN1 (Seite 4 von 48) (Englisch)

771471

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Where there is machinery which emits electromagnetic waves.

Electromagnetic waves can disturb the control system and

cause equipment malfunction.

Where flammable gases may leak, where carbon fiber or

ignitable dust is suspended in the air or where volatile

flammables such as paint thinner or gasoline are handled.

These types of gases might cause a fire.

Where the air contains high levels of salt such as near the

ocean.

Where voltage fluctuates a lot, such as in factories.

In vehicles or vessels.

Where acidic or alkaline vapors are present.

■

This appliance can be used by children 8 years old and above and

persons with reduced physical, sensory or mental capabilities or

lack of experience and knowledge if they are supervised or given

instruction on using the unit in a safe manner and understand the

hazards involved. Children should not play with the unit. Cleaning

and user maintenance should not be done by children without

supervision.

■

Children should be supervised to ensure that they do not play with

the appliance.

■

If the supply cord is damaged, it must be replaced by the

manufacturer or its service agent or a similarly qualified person.

■

DISPOSAL: Do not dispose this product as unsorted municipal

waste. Collection of such waste separately for special treatment is

necessary.

Do not dispose of electrical appliances as municipal waste, use

separate collection facilities.

Contact your local government for information regarding

the collection systems available.

If electrical appliances are disposed of in landfills or dumps,

hazardous substance can leak into the groundwater and get into the

food chain, damaging your health and well-being.

■

The wiring must be performed by professional technicians in

accordance with national wiring regulation and this circuit diagram.

An all-pole disconnection device which has at least 3mm

separation distance in all pole and a residual current device(RCD)

with the rating not exceeding 30mA shall be incorporated in the

fixed wiring according to the national rule.

1 Operation panel

2 Water manometer

3 Air purge valve

4 Axial-flow fan

5 Differential pressure switch

6 Condenser

7 Accumulator

8 Security discharge

9 Electric expansive valve

10 Plate heat exchanger

4.2 Unit connections

5/7kW

11 Electrical control box

12 High pressure switch

13 4-ways valve

14 Expansion tank

15 Pump

16 Low pressure switch

17 Storage tank

18 Compressor

19 Auto-water replenishing

valve

OVERVIEW OF THE UNIT

4.1

Main parts of the unit

10~16kW

1 Operation panel

2 4-ways valve

3 Storage tank

4 Pump

5 Electric expansive valve

6 Compressor

7 Air purge valve

8 Electrical control box

9 Water manometer

10 Expansion tank

11 Plate heat exchanger

12 Condenser

13 Axial-flow fan

14 Adapter substitute

(accessory)

15 Security discharge

16 Auto-water replenishing

valve (accessory)

17 Water flow switch

18 High pressure switch

19 Low pressure switch

1 Water inlet

2 Water outlet

3 Auto-water replenishing orifice

4 Water outlet of safety Valve

5 Wire hole

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun KEM-07 DVN1 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KEM-07 DVN1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info