Bedienungsanleitung Kaysun KEM-12 DVN (Seite 3 von 48) (Englisch)

771473

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

CAUTION

SAFETY CONSIDERATIONS

The precautions listed here are divided into the following types.

They are quite important, so be sure to follow them carefully.

Meanings of DANGER, WARNING, CAUTION and NOTE symbols.

DANGER

Indicates an imminently hazardous situation which if not

avoided, will result in serious injuries.

WARNING

Indicates a potentially hazardous situation which if not

avoided, could result in serious injuries.

CAUTION

Indicates a potentially hazardous situation which, if not

avoided, may result in minor or moderate injury. It is also

used to alert against unsafe practices.

NOTE

Indicates situations that could only result in accidental

equipment or property damage.

■

Before touching electric terminal parts, turn off power switch.

■

When service panels are removed, live parts can be easily

touched by accident.

Never leave the unit unattended during installation or servicing

when the service panel is removed.

■

Do not touch water pipes during and immediately after operation

as the pipes may be hot and could burn your hand. To avoid injury,

give the piping time to return to normal temperature or be sure to

wear protective gloves.

■

Do not touch any switch with wet fingers. Touching a switch with

wet fingers can cause electrical shock.

manual using a separate circuit.

Insufficient capacity of the power supply circuit or improper electrical

construction may lead to electric shocks or fire.

■

Be sure to install a ground fault circuit interrupter according to local

laws and regulations.

Failure to install a ground fault circuit interrupter may cause electric

shocks and fire.

■

Make sure all wiring is secure. Use the specified wires and ensure

that terminal connections or wires are protected from water and

other adverse external forces.

Incomplete connection or affixing may cause a fire.

■

When wiring the power supply, form the wires so that the front panel

can be securely fastened.

If the front panel is not in place there could be overheating of the

terminals, electric shocks or fire.

■

After completing the installation work, check to make sure that there

is no refrigerant leakage.

■

Never directly touch any leaking refrigerant as it could cause severe

frostbite.

■

Do not touch the refrigerant pipes during and immediately after

operation as the refrigerant pipes may be hot or cold, depending on

the condition of the refrigerant flowing through the refrigerant piping,

compressor and other refrigerant cycle parts. Burns or frostbite are

possible if you touch the refrigerant pipes. To avoid injury, give the

pipes time to return to normal temperature or, if you must touch

them be sure to wear protective gloves.

■

Do not touch the internal parts (pump, etc.) during and immediately

after operation.

Touching the internal parts can cause burns. To avoid injury, give the

internal parts time to return to normal temperature or, if you must

touch them, be sure to wear protective gloves.

■

Before touching electrical parts, turn off all applicable power to

the unit.

■

Tear apart and throw away plastic packaging bags so that children

will not play with them.

Children playing with plastic bags face danger of serious injuries

by suffocation.

■

Safely dispose of packing materials such as nails and other metal

or wood parts that could cause injuries.

■

Ask your dealer or qualified personnel to perform installation work

in accordance with this manual. Do not install the unit yourself.

Improper installation could result in water leakage, electric shocks

or fire

■

Be sure to use only specified accessories and parts for installation

work.

Failure to use specified parts may result in water leakage, electric

shocks, fire, or the unit falling from its mount.

■

Install the unit on a foundation that can withstand its weight.

■

Insufficient physical strength may cause the equipment to fall and

possible injury

■

Perform specified installation work with full consideration of strong

wind, hurricanes, or earthquakes.

Improper installation work may result in accidents due to equipment

falling.

■

Make certain that all electrical work is carried out by qualified

personnel according to the local laws and regulations and

this

■

Ground the unit.

Grounding resistance should be according to local laws and

regulations

Do not connect the ground wire to gas or water pipes,

lightning conductors or telephone ground wires.

Incomplete grounding may cause electric shocks.

Gas pipes.

Fire or an explosion might occur if the gas leaks.

Water pipes.

Hard vinyl tubes are not effective grounds.

Lightning conductors or telephone ground wires.

Electrical threshold may rise abnormally if struck by a lightning bolt.

■

Install the power wire at least 3 feet (1 meter) away from

televisions or radios to prevent interference or noise. (Depending

on the radio waves, a distance of 3 feet (1 meter) may not be

sufficient to eliminate the noise.)

■

Do not wash the unit. This may cause electric shocks or fire. The

appliance must be installed in accordance with national wiring

regulations. If the supply cord is damaged, it must be replaced by

the manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

■

Do not install the unit in the following places:

Where there is mist of mineral oil, oil spray or vapors.

Plastic parts may deteriorate, and cause them to come

loose or water to leak.

Where corrosive gases (such as sulphurous acid gas) are

produced.

Where corrosion of copper pipes or soldered parts may cause

refrigerant to leak.

DANGER

WARNING

Kaysun KEM-12 DVN Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KEM-12 DVN

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info