Bedienungsanleitung Kaysun KHHP-BI (Seite 12 von 45) (Englisch)

771525

Zoom out

Zoom in

Vorherige Seite

1/45

Nächste Seite

Page 12



Operations

Press this button to turn on or o the

auxiliary electric heat function.

Temperature setting

Lower Raise

°C & °F scale selection

Press DHW key to enter the hot

water setting temperature

adjustment,press “ ” and

“ ” to select the temperature.

Setting Temperature Range :

35~55°C(95~131°F ).

Press the buttons “ ” and “ ” for 3 seconds

will alternate the temperature display between

the °C & °F scale.

Child lock function

AUXILIARY ELECTRICAL HEATER function

Press the buttons “ ”

and “ ” for 3

seconds to activate the child lock function and

lock all buttons on the wire controller.

Press the buttons again for 3 seconds to

deactivate the child lock function.

When the child lock function is activated,the

mark appears.

• Press this button, it is forced to turn on

the electric auxiliary heating (the user

has a strong heating demand).

Electric auxiliary heat is turned on when it

meets the mandatory opening condition.

• Press Again, it is the electric auxiliary heat

automatic control. Electric auxiliary heat is

turned on at the most suitable time according

to the control scheme, considering energy

saving and comfort.

Energy saving

button

(Eective in heating mode):

Set button:

Press this button, the indoor unit

operates in economy mode,press

again, exit this mode (it may be ineective

for some models)

Press SET button for 2 seconds to enter

the query mode.

1. After entering the query mode, the time area at

the lower right corner displays CL, indicating the

cleaning function.

2. Press SET button to enter the

setting interface, press “ ”

and “ ” to select on or o,

then press Conrm button to

conrm, select on to indicate

the cleaning function is turned

on, at the same time, the interface

will display CL.

3. Press Power button or Back button

to exit, or the internal machine

nishes the cleaning function

to exit.

4. Press the buttons “ ”and “ ” can

choose other parameter query.

When FB is selected, it means the

forced return function. Press set to

enter the setting interface, and

select whether to enable forced

return. When on is selected, it

means enabled.

When CB is selected, it means the disinfection

function. Press set to enter the setting interface,

select whether to enable disinfection function.

When On is selected, it means that it is on. After

selecting ON, set the day of the week. After setting,

press Conrm button to enter the time setting,

and then press the Conrm button to conrm.

Select T: 01, it means TW_in temperature sensor for

exchanger intlet water.

SelectT: 02 it means TW_out temperature sensor for

exchanger outlet water.

TW_Out heat exchanger.

Select T: 03, it means TW1 temperature sensor for

outlet wate of hydraulic module.

Select T: 04, it means TR_out temperature sensor

for refrigerant gas.

Select T: 05, it means TR_in temperature sensor for

refrigerant liquid.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun KHHP-BI Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KHHP-BI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info