Bedienungsanleitung Kaysun KHPI-BI-10VR2XL (Seite 38 von 44) (Englisch)

771478

Zoom out

Zoom in

Vorherige Seite

1/44

Nächste Seite

Water pressure

Check the water pressure, if it is below 1 bar,fill water

to the system.

Water filter

Clean the water filter.

Water pressure relief valve

Check for correct operation of the pressure relief

valve by turning the black knob on the valve

counter-clockWise:

The following checks must be performed at least once a

year by qualified person.

Carry out a thorough visual inspection of the switch

box and look for obvious defects such as loose

connections or defective wiring.

Check for correct operation of contactors with an

ohm meter. All contacts of these contactors must be

in open position.

Pressure relief valve hose

Check that the pressure relief valve hose is

positioned appropriately to drain the water.

Backup heater vessel insulation cover

Check that the backup heater insulation cover is

fastened tightly around the backup heater vessel.

Domestic hot water tank pressure relief valve (field

supply).

Check for correct operation of the pressure relief

valve on the domestic hot water tank.

Unit switch box

If you do not hear a clacking sound, contact your

local dealer.

In case the water keeps running out of the unit,

close both the water inlet and outlet shut-off

valves first and then contact your local dealer.

9 TEST RUN AND FINAL CHECKS

The installer is obliged to verify correct operation of unit

after installation.

9.1 Final checks

Before switching on the unit, read following recommendations:

When the complete installatio n and all necessary

settings have been carried out, close all front panels

of the unit and refit the unit cover.

The service panel of the switch box may only be

opened by a licensed electrician for maintenance

purposes.

9.2 Test run operation (manually)

If required, the installer can perform a manual test

run operation at any time to check correct operation

of air purge, heating, cooling and domestic water

heating, refer to 8.4.11 "TEST RUN" .

10 MAINTENANCE AND SERVICE

In order to ensure optima l availabilit y of the unit, a number

of checks and inspection s on the unit and the field wiring

have to be carried out at regular intervals.

This maintenance needs to be carried out by your local

technician.

In order to ensure optima l availabilit y of the unit, a number

of checks and inspection s on the unit and the field wiring

have to be carried out at regular intervals.

This maintenance has to be carried out by your local

technician.

DANGER

ELECTRIC SHOCK

Before carrying out any maintenance or

repairing activity, must switch off the power

supply on the supply panel.

Do not touch any live part for 10 minutes after

the power supply is turned off.

The crank heater of compressor may operate

even in standby.

Please note that some sections of the electric

component box are hot.

Forbid touch any conductive parts.

Forbid rinse the unit. It may cause electric

shock or fire.

Forbid leave the unit unattended when

service panel is removed.

15 INPUT DEFINE

15.11 PUMP SILENT MODE

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Kaysun KHPI-BI-10VR2XL Seite 38

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Kaysun KHPI-BI-10VR2XL

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info